Cannot find fuse box

[Campncouple]

We have just brought home 2002 Damon Intruder. Right blinker not working. Have looked everywhere for fuse box cannot find it. Any help appreciated.
Thank You.

[Muddydogs]

Well not so much confused as a lack of information in the OP and me not taking the time to figure what info should have been included.

[D_E_Bishop]

I think Muddydogs is confused as the Damon Intruder is a Class A. There is a problem with a fuse or two and should be pretty easy to determine what is wrong.

Here are two hints for helping you understand and isolate problems with your rig. First read The Twelve Volt Side of Life and second buy and learn how to use a DMM or Digital MultiMeter. Harbor Freight has a 7 function for about $5.00 when on sale and if they are close, subscribe to their ads and you will eventually find a coupon for the meter free of charge.

Finding the fuse/circuit breaker panel(s) may be harder than diagnosing the problem. Typical places to look, cabinets at floor level, cabinets at eyelevel, under the bed, down at floor level under a toe kick. The dealer who sold the unit should know or if purchased from a PP try them.

If you can't find it after look all over, try the Damon Owners club on Yahoo or do a search for an owners club.

[Campncouple]

Okay thank you all. This it what seem to be going on. No right blinker light, no Inside track lights and no outside running lights. Help!!
Do we need to take to shop? Electrical wiring problem?? Expensive fix??

[Trails_And_Tail]

Ours is under the bed.

[Muddydogs]

Blinkers aren't fused, check the bulb, wiring and trailer plug. Your outside trailer lights (blinkers, brakes and running lights) are a separate system from the inside trailer wiring and do not run through the trailer fuse box.
Is your TV blinker working? If not then look at the TV fues box first.

Most likely its the bulb.

[gbopp]

I don't know where your breaker box is located. On our 96 Southwind, it's under the refrigerator.
Start opening panels and looking. It's there somewhere.

[Vulcan_Rider]

Well you have two different problems.

Hopefully someone can help you find the fuses but.......
that has no bearing on only ONE blinker bulb (or a pair if both on that side are dead) that doesn't work, as they are not fused individually.

Unless you have corroded sockets, you most likely have a problem in the wiring......or the selector switch.