โAug-23-2019 03:38 PM
โAug-23-2019 07:30 PM
cruz-in wrote:BFL13 wrote:
Do you really have to isolate the Lis from the TV batteries? Why?
check out this thread...many others on the subject..
Interaction Between LI and TV's Lead Acid
โAug-23-2019 06:56 PM
BFL13 wrote:
Do you really have to isolate the Lis from the TV batteries? Why?
โAug-23-2019 06:51 PM
time2roll wrote:
Stick with the 20 amp. This thing boosts voltage so you need more than the rated amps protecting the circuit. You would need a 50 amp circuit to go to the 40 amp level. Solid 20 amps is still a significant charge.
โAug-23-2019 06:37 PM
โAug-23-2019 05:57 PM
โAug-23-2019 05:48 PM
โAug-23-2019 05:35 PM
โAug-23-2019 05:32 PM
โAug-23-2019 05:18 PM
โAug-23-2019 05:10 PM
โAug-23-2019 04:50 PM
pianotuna wrote:X2 Wire length, amps and volts all factor into what size wire to use. Maybe the manual has some guidelines?
Dan,
Think about beefing up the charging wire to meet the 40 amp requirement?
โAug-23-2019 04:45 PM
โAug-23-2019 04:38 PM
โAug-23-2019 04:34 PM