cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Water fill connection fitting

Rycher
Explorer
Explorer
I broke this connection when removing my fresh water tank. i need a new one but cant seem to find what im looking for. its barbed on one side and slip on the other. similar to the below picture . the MTP side would be slip. i believe its 1 3/8. this was the coupling used to marry the fill hose with the top connection on the fresh water tank.



11 REPLIES 11

Boon_Docker
Explorer III
Explorer III
fourthclassC wrote:
1/2" plastic hose barb. (1/2 male pipe thread by 1/2" hose barb ) common, easy to obtain fitting. No need for 3d printing or anything more. Any home depot or hardware store will have it


1/2 barb x 1/2 pipe thread is common.

barb x spigot that the OP is looking for is not so common.

fourthclassC
Explorer
Explorer
1/2" plastic hose barb. (1/2 male pipe thread by 1/2" hose barb ) common, easy to obtain fitting. No need for 3d printing or anything more. Any home depot or hardware store will have it

Sjm9911
Explorer
Explorer
The big box stores usally have them in stock. Thats where I got mine when it broke.
2012 kz spree 220 ks
2020 Silverado 2500
Equalizer ( because i have it)
Formerly a pup owner.

Boon_Docker
Explorer III
Explorer III
BB_TX wrote:
Google hose barb to pipe thread adapter.


It is not pipe thread x barb, it is a spigot x barb.

Boon_Docker
Explorer III
Explorer III
Here is another link for the spigot x barb fitting.

Doesn't look like they make a 1 3/8. I bet your fitting is a 1 1/2.

fyrflie
Explorer III
Explorer III
Check McMaster Carr.
https://www.mcmaster.com/
If they donโ€™t have it, it probably doesnโ€™t exist.

agesilaus
Explorer III
Explorer III
Happened to me, the solution: buy the whole connector
Arctic Fox 25Y Travel Trailer
2018 RAM 2500 6.7L 4WD shortbed
Straightline dual cam hitch
400W Solar with Victron controller
Superbumper

BB_TX
Nomad
Nomad

Grit_dog
Navigator
Navigator
Hardware store.
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5โ€ turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

LittleBill
Explorer
Explorer
so both sides slip on? if you had a set of calipers. I could probably make and print a 3d part of this for a fee

Boon_Docker
Explorer III
Explorer III
Found these spigot x barb fittings, but no 1 3/8.