What is this On/Off switch for??

[SJ-Chris]

Hi All,

I've got a 2006 Four Winds 31P Class C. Right above the mirror adjustment controls on the driver side there is an On/Off switch. It does not appear to have anything to do with the mirror adjustment controls (they work fine whether this switch is in the On or Off position). Does anyone know what this switch is for? The only thing I can think of is perhaps a defrost for the side mirrors???

Any thoughts? Thanks!

Picture attached.

Chris

[Huntindog]

I can't tell right now.. I lost my magnifying glass.

[Johno02]

Right! Realized that after looking closer at the picture. Good that the pix was big enough to see that. And thanks to whoever for resizing.

[DrewE]

Johno02 wrote:
Either mirror heat, or to select which mirror to move.

The mirror selector toggle for movement is in the middle of the four-way pad that controls the movement.

[Johno02]

Either mirror heat, or to select which mirror to move.

[campinginthewoo]

Wow let's bust a new member who first posts because he posted a picture that didn't conform to the rules. Lucky downtheroad fixed the small problem. Not everyone is as smart as you!! We all have issues and they get taken care by nice fellow campers. Lightenup ScottG

[Tom_M1]

My 2005 on Ford chassis has the same control. It's for mirror heat.

[Jayco-noslide]

My Itasca 30 ft. Class C has a switch similar position and it will direct the RV house battery current to start the motor if the chassis battery is dead. Used it once to start the MH when the motor battery was gone.

[gbopp]

Mirror heat would be my guess.

[Bumpyroad]

I can't read anymore, my eyes got tired.
bumpy

[petersr58]

Electrical control switch for heated mirrors.

[MEXICOWANDERER]

OK. What DrewE said.

For a while it was like trying to watch a 20 acre size drive in movie theater from fifty feet distance.

[DrewE]

As was said, this is to turn the mirror heaters on or off.

[ScottG]

Maybe you should re-size the image to forum rules.

[MEXICOWANDERER]

WOW!
I can see with electrons circling neutrons clarity...

Would this control not be for adjustment of electrically controlled outside mirrors? The rig may not have them as an option but there is the switch (?)