This is a removeable DVD stand I made out of conduit and wood for the back bunk in our Jayco 23B. swivels and tilted slightly. I also made one that will slide in the post where our regular TV sits for those "Dry camping" days!!
Weather station.
Clock installed above Dinette.
No need to bring a chunk of wood with.
Weather station.
Clock installed above Dinette.
No need to bring a chunk of wood with.
Here are a few other mods I did on the Roo 23ws:
1- Installed a garbage can in the front cabinet by the door:
Installed a mirror in the rear private room:
Installed an Oxygenic shower head:
Installed a television bracket on the wall in the rear room:
And finally, brought the antenna/cable to the front cabinet
Dre
1- Installed a garbage can in the front cabinet by the door:
Installed a mirror in the rear private room:
Installed an Oxygenic shower head:
Installed a television bracket on the wall in the rear room:
And finally, brought the antenna/cable to the front cabinet
Dre
Mod # 1
DW wanted a backsplash on our 23ws. I used Peel and Stick tiles bought at Lowe's, which have the look of real tiles....
The end result is beautiful!
DW wanted a backsplash on our 23ws. I used Peel and Stick tiles bought at Lowe's, which have the look of real tiles....
The end result is beautiful!
What are purpose of wheelies have them under the NTM hybrid
bud121156 wrote:
Wheelies!
T3rry1 wrote:
And last is my exterior lighting, for this i used waterproof led light strip from eBay, tapped in to the exterior light (and removed the bulb from the orange light), so now this is controlled by the factory switch for the exterior light.
Cleaned it up with some white duct tape, and ran a strip of clear gorilla tape over the entire strip to try to keep it clean and secure (especially at highway speeds, not sure i'd trust the stock adhesive)
Lights up the campsite very well, without blinding you if you look at it.
Planned future mods, is LED strips in the outside storage, inside cupboards and a step light, all switch operated so they are only on when the respective door is open.
Also building a stabilizer setup, based off of rockeeze.. hope it works alright.
and i hope to implement some storage options, many of which i found on here.
Oh also a rear hitch for the bike rack, and for our paddle boat, my brother is a journeyman welder so we'll get it done right!
I ordered the lights from the same place.....no problem.
After installation, I found the lights a little too bright. I installed a dimmer between the switch and the lights and that solved the problem.
turkeylord wrote:
Use the BBCode link from Imgur without any additional formatting.
Looks great BTW. ๐
Thanks for the help, and the compliment ๐
karrun wrote:
[img][/img]
LED lit wine rack.
Okay, what am I doing wrong? I copy and paste the url to my photo on Imgur.
I could never give up my shower. To many years in the popup without one. Actually our popup had one,but it just wasn't private enough with a family.
