May-04-2017 08:14 AM
May-04-2017 10:37 PM
May-04-2017 05:11 PM
May-04-2017 04:43 PM
May-04-2017 02:14 PM
May-04-2017 02:10 PM
Bedlam wrote:
Here's your 5500 chassis cab with a pickup bed:
http://www.cumminsforum.com/forum/4th-gen-cab-chassis/2241985-stunning-5500-laramie-c-c-pickup-box.h...
http://www.fieldschryslerdodgejeepram.com/commercial-new/Ram/2017-Ram-5500+Chassis-8b22db1b0a0e0ae71...
http://www.ramtrucks.com/hostd/windowsticker/getWindowStickerPdf.do?vin=3C7WRNELXHG520281
May-04-2017 02:01 PM
May-04-2017 12:11 PM
May-04-2017 11:43 AM
Bedlam wrote:
Some of this was covered in the question you asked in the Tow Vehicle section. You will be close to maximum rear axle rating just carrying the Mammoth on a Class 3 truck. You really need to be looking at trucks with a larger capacity Dana axle (Class 4 or larger unless you choose the derated F450 pickup).
May-04-2017 11:39 AM
May-04-2017 11:35 AM
May-04-2017 11:06 AM
May-04-2017 11:06 AM
May-04-2017 10:20 AM
zb39 wrote:
I am driving what you want. see sig. Def get the factory air. It is awesome, no sag, no sway. Towing is easy with these. Just call TL. Ask me any questions. Factory GVW 14k. rear axle 9750 front 6k. Factory tires are higher than that. 900 pound feet of tq!!!!!!! Get 4.10 rear with AESIN tranny. spelling is prob off there.
I look forward to seeing your rig.
May-04-2017 10:18 AM
sbryan@vtbryans.com wrote:
You'll end up spending the $100k when you factor in the Host plus the new truck so you best make sure SWMBO agrees.:-)