Today we modified one of the storage closets in our TC. The original space had a huge cavernous bottom section where items would get lost in the depths. We cut out part of the Azdel paneling to gain access to the bottom of the cavern. We trimmed the cutout area with leftover material from when we cannibalized the bunk beds that came with the unit.
We then added a pullout wire drawer in that area. We also added a shelf (similar to the original shelves) at the bottom of the original door level.
We plan on adding a front to the wire drawer using the Azdel from the cutout to cover the open gap.
Original interior:
Cutout:
Full closet area:
Wire drawer installed:
Trim Work:
New shelf above basket:
We then added a pullout wire drawer in that area. We also added a shelf (similar to the original shelves) at the bottom of the original door level.
We plan on adding a front to the wire drawer using the Azdel from the cutout to cover the open gap.
Original interior:
Cutout:
Full closet area:
Wire drawer installed:
Trim Work:
New shelf above basket:
