I got my camper out of storage today and de-winterized it. When I hook the water hose to the inlet valve and turn the valve to the city side it will allow water to by-pass and go into my fresh water tank.
When I turned off the water and turned on the pump the pump would build pressure and hold like it suppose to.
If I left the city water valve turned to allow the city water in, the pump would cycle on and off.
Is this a bad inlet valve? Seems like it is not closing off properly when turned to the city water side.
Or is this a check valve issue? I am not sure where the check valve is, or should I install one?
I was going to start with a new valve and hoped that fixed it, but when reading about this issue the check valve issue came up.
Maybe I am over thinking this and it's just a valve. Open to any insight or anyone that has had this issue.
Can't leave the water on this way, the fresh water tank will fill.
Thanks for your help ahead of time.
2016 Keystone
Laredo 331BH
2016 F250 6.2L SD Crewcab