โMay-22-2018 10:22 AM
โMay-25-2018 08:32 AM
โMay-23-2018 10:14 AM
โMay-22-2018 11:30 PM
Jim@HiTek wrote:
As mentioned, make sure you have BOTH 120 Vac and 12 Vdc. The control circuits need 12 volt and if it was unplugged for a while, the batteries could be too low...in which case, the refer is designed to light up, but not operate. (At least my '02 Norcold booklet says that). So add the time it takes the converter to charge the batteries up to 13 volt (I believe) before it starts working.
โMay-22-2018 04:49 PM
โMay-22-2018 04:47 PM
โMay-22-2018 12:09 PM
โMay-22-2018 11:46 AM
โMay-22-2018 10:49 AM
โMay-22-2018 10:32 AM