โApr-02-2016 10:59 AM
โApr-13-2016 09:26 AM
โApr-13-2016 09:20 AM
6pac wrote:
Need to remove Onan 2500lp but am confused about the number of bolts holding unit. I know the exhaust system needs to be removed , after use a jack to lower to floor . The problem is there are bolts an nuts or threaded bolts holding the unit in place. Does anyone have any experience in this ? FYI the unit cranks but will not start , can't check the spark (can't reach) it's getting fuel (I can smell propane . Checked the drop tube for insect didn't find any.
โApr-03-2016 10:36 PM
DOITHARD wrote:zcookiemonstar wrote:
I have the Onan Microlite 2500 Gas in my Toy hauler. It has six bolts that hold it in from the bottom. My Onan has threaded holes so no nuts to deal with. Other then that a fuel line power wires and a ground strap to the frame oh and the exhaust pipe.
I'm considering converting my 2016 Microlite 2800 from propane to gasoline. Does your 2500 have an electric fuel or is gravity fed? I can't deal with looking for propane in the middle of nowhere?
โApr-03-2016 09:02 PM
zcookiemonstar wrote:
I have the Onan Microlite 2500 Gas in my Toy hauler. It has six bolts that hold it in from the bottom. My Onan has threaded holes so no nuts to deal with. Other then that a fuel line power wires and a ground strap to the frame oh and the exhaust pipe.
โApr-03-2016 10:16 AM
โApr-02-2016 06:08 PM
โApr-02-2016 03:53 PM
โApr-02-2016 11:32 AM
Bud
USAF Retired
Pace Arrow