you need to keep weight in mind. Tounge weight of trailer plus the weight of the camper. Do you know the GVWR and the GCVWR on your truck? Look at the door or door post on the driver's side of the truck, then go get a full tank of gas and go weight your truck. Then you can figure out how much weight you can safely carry
You will need some accessories. You will need tiedowns. (
Torklift or
Happyjack or a
belly bar.) - unless the camper comes with
Stable lift jacks - then the stable lift will serve as both jacks and tie downs.) Make sure you get spring loaded turnbuckles. You will want a rubber mat in your bed to keep the camper from sliding.
If you are to be fiscally conservative, you probably will be looking at older units with manual jacks - possibly even the older 3 point jacks. Make sure you learn about those.
Other ways to save on money and weight. Older and/or smaller units come with limited bath/shower/toilet facilities, some with none at all. Also some have small or no holding tanks. Make sure you understand what that means.
As you are towing, unless you want to put a bunch of money into hitch extensions, get a TC model that has little to no overhang. (this will also shrink the weight and price)
To keep the weight down - look at popup models. Make sure the hasps to lock the roof down are in good condition.
To keep weight and price down - skip the roof A/C
thats about all I can think of before my morning coffee.
One beautiful wife -Trooper and Doc the furcampers
2019 Dodge 4500 Flatbed with 2013 Chalet TS116 http://www.brittanynews.us