โMay-31-2018 11:25 AM
โJun-04-2018 08:23 AM
โJun-04-2018 04:30 AM
#1nobby wrote:
Leveling gadgets are just a great way to separate YOU from your money.
โJun-03-2018 10:04 PM
โJun-02-2018 07:58 AM
SoundGuy wrote:GrandpaKip wrote:
I made my Andersen copies out of yellow pine about 4 years ago. One of them is shorter than the other to fit between the tires, which are 3โ apart at the closest.
I have yet to see an easier method of side to side leveling a TT.
Mine are perhaps half that, just far enough apart that I can get a totally collapsed X-Chock between the adjacent tires ... Andersens, even cut down, just won't fit. ๐ Sometimes "easy" just isn't that easy. ๐
โJun-02-2018 03:41 AM
LVJJJ wrote:
way too complicated for me. Prefer to use correct number of lego blocks (prefer the yellow kind). Don't like green either.
โJun-01-2018 06:45 PM
โJun-01-2018 05:06 PM
Ralph Cramden wrote:
Beveled edges LOL......I don't think I have ever had a campsite on paving as in those pictures.
Ralph Cramden wrote:
When you show up at the campsites we search out and have had a couple days of torrential storms beforehand you need to do what works. Fancy manufactured gizmos have never foot the bill. The one lynx cap notwithstanding.
โJun-01-2018 04:43 PM
SoundGuy wrote:SoundGuy wrote:
Sorry, but as illustrated in that link I'd never elevate just one low side tire on a dual axle trailer. Thumbs down from me. ๐parker.rowe wrote:
Why not? Just curious.
One tire, axle, and suspension components are subjected to far more stress than the other tire, axle, and suspension components on the same side of the trailer, and for days at a time while you're camping. Why, when there's no need? :R
Interestingly, later that same link shows both tires properly elevated.
I agree with others in that I see no advantage whatsoever to this Hopkins kit when simply beveling the edges of the 2x achieves exactly the same thing. :S
โJun-01-2018 04:14 PM
โJun-01-2018 04:06 PM
โJun-01-2018 08:41 AM
GrandpaKip wrote:
I made my Andersen copies out of yellow pine about 4 years ago. One of them is shorter than the other to fit between the tires, which are 3โ apart at the closest.
I have yet to see an easier method of side to side leveling a TT.
โJun-01-2018 07:13 AM
SoundGuy wrote:siamese wrote:
For easy effective leveling, I haven't seen anything that surpasses the Anderson leveling system.
My Freedom Express axles are set 29" apart so Andersen levelers, even trimmed, won't fit. ๐ Some who tried the Andersens have reported here on the forums breakage when sitting on an uneven ground surface such as crusher stone, sinking in soft ground surfaces such as mud or sand, and slippage on slick surfaces such as tarmac. Guess I'll stick with my Lynx / Wood leveling system. ๐
โJun-01-2018 04:20 AM
siamese wrote:
For easy effective leveling, I haven't seen anything that surpasses the Anderson leveling system.
โJun-01-2018 03:28 AM