I went to turn on the refrigerator and it had the NO FLO error. I went to the back panel to see what the issue was and I saw this wire/fuse completely disconnected. Anyone know what this fuse is for and should I just connect these two wires? I got the refrigerator to work on propane now, I dont want to connect the two and damage something as I plan on using the refrigerator the next few days. I am not sure if this was intentionally disconnected from factory or service but this is a new camper.
Edit: I went to take a larger picture to see where the wires come from. The blue wire connected to the fuse comes from the top of the picture and the brown wire comes from the round part in the middle left of the picture.
Also, the wires are/were resting on the black pipe which lights the pilot. The refrigerator has barely been on for an hour and it is very hot to the touch. Something is telling me these electric wires shouldnt be sitting on it.
If someone has a picture of how these wires should sit I would appreciate it.
Sorry having issues uploading second pic, located at this link.
https://ibb.co/i1RfLk
Edit: I went to take a larger picture to see where the wires come from. The blue wire connected to the fuse comes from the top of the picture and the brown wire comes from the round part in the middle left of the picture.
Also, the wires are/were resting on the black pipe which lights the pilot. The refrigerator has barely been on for an hour and it is very hot to the touch. Something is telling me these electric wires shouldnt be sitting on it.
If someone has a picture of how these wires should sit I would appreciate it.
Sorry having issues uploading second pic, located at this link.
https://ibb.co/i1RfLk
That has to be the oddest picture hosting site...
On the previous second picture you can just see a tiny bit of the brown wire going to this button. Its, I'm sure, appreciated by someone when a installer decides what ever color wire they choose to use is ok differing from original items mfg. Just makes tracing wires so much more challenging....
Though both ends, pos/neg disconnected (that is in itself odd) Id tape or nut the wire ends-stuff out of harms way.
Having a hard time correlating the schematics with pictures-one shows shared wiring with fans?
Bottom line I don't see risk using fridge until serviced.
(blue wire)edit looked at pdf? (p47-48 of doc- the foil? do you have ice maker?
Had similar issue, though Dometic, mysteriously a wire appeared, goes up to fan and had 'fallen' out of butt connector. Yours is different but noted where blue wires go up at the first yellow sticker, behind the white 'clip', looks like a terminal ?
>
https://image.ibb.co/gapNY5/20170510_153837.jpg
Huge picture but details can be seen....
Odd that both brown and black wires come from blue-like a big loop. Wouldn't hook up anything until verified, some expensive equipment but agree should tidied up a bit until then..
Had similar issue, though Dometic, mysteriously a wire appeared, goes up to fan and had 'fallen' out of butt connector. Yours is different but noted where blue wires go up at the first yellow sticker, behind the white 'clip', looks like a terminal ?
>
https://image.ibb.co/gapNY5/20170510_153837.jpg
Huge picture but details can be seen....
Odd that both brown and black wires come from blue-like a big loop. Wouldn't hook up anything until verified, some expensive equipment but agree should tidied up a bit until then..
