Jul-13-2015 08:08 PM
Jul-15-2015 10:16 AM
Jul-15-2015 09:57 AM
Jul-14-2015 10:06 PM
AnEv942 wrote:
Because running/parking lights are working and right signal (is trying) it sounds as though new plug was wired in standard 7 pin configuration instead of Lances configuration. The 2 functions noted are in same locations. But the other connections are WAY different.
Jul-14-2015 09:35 PM
Jul-14-2015 12:47 PM
Jul-14-2015 12:31 PM
Jul-14-2015 08:13 AM
Jul-14-2015 08:11 AM
Jul-14-2015 07:25 AM
Jul-14-2015 04:13 AM
Jul-13-2015 11:23 PM
Jul-13-2015 09:04 PM
Jul-13-2015 08:50 PM
MuGGzy wrote:
200? Lance truck camper with the little round plug. We just got it back from the dealer after having a hitch and tie downs installed and they put a new round bed liner plug in for this new lance plug. Our previous camper used a big round "blade" connector and there is a connector in the bed that worked with that camper just fine.
Well I forgot to test the lights when we were at the lot, while everything inside works fine, the turn and tail signals are all wonky.
If I turn on the left turn signal, nothing happens.
If I try the right turn signal, all the tail lights blink like the hazards are on.
The brake lights seem sporadic.
I presume something is crossed up or some wires are making contact that shouldn't.
The dealer will let me bring it back to fix it but they don't have shop time for over a week so if I can just reconnect some wires that are connected wrong then that will save me time.
Ideas?
Jul-13-2015 08:46 PM