โJun-08-2021 09:10 PM
โJun-14-2021 03:06 PM
โJun-14-2021 08:24 AM
โJun-14-2021 06:23 AM
โJun-14-2021 05:11 AM
โJun-13-2021 07:32 PM
Thermoguy wrote:
By the way, the dealer that I bought it from
โJun-13-2021 06:01 PM
SweetLou wrote:bob213 wrote:
I have a 2005 Duramax as well. It only has 44,000 miles so if I waited for the dash indicator I would have some pretty old oil before I changed it. We have expensive engines, so $35 a year seems like cheap insurance. I change mine at the start of every camping season unless I make a cross country trip and really do a lot of miles.(8000 plus).
$35 per year? Ha I don't think so
โJun-13-2021 09:53 AM
SweetLou wrote:bob213 wrote:
I have a 2005 Duramax as well. It only has 44,000 miles so if I waited for the dash indicator I would have some pretty old oil before I changed it. We have expensive engines, so $35 a year seems like cheap insurance. I change mine at the start of every camping season unless I make a cross country trip and really do a lot of miles.(8000 plus).
$35 per year? Ha I don't think so
โJun-13-2021 07:48 AM
bob213 wrote:
I have a 2005 Duramax as well. It only has 44,000 miles so if I waited for the dash indicator I would have some pretty old oil before I changed it. We have expensive engines, so $35 a year seems like cheap insurance. I change mine at the start of every camping season unless I make a cross country trip and really do a lot of miles.(8000 plus).
โJun-12-2021 08:41 PM
Cummins12V98 wrote:
I have a saying. Sometimes itโs best to pizz with the pecker ya Gotz.
โJun-12-2021 07:07 PM
โJun-12-2021 01:15 PM
Cummins12V98 wrote:Lynnmor wrote:cummins2014 wrote:Grit dog wrote:
This thread gets funnier by the day!
They haven't even got into the debate about socket size for the front fuel filter here yet , whether you should go 28MM or 1*1/8" :B
1-1/8" is way too loose, let the debate start here. ๐
OK will bite.....NOT HARDLY. 1-1/8" = 28.575mm
I have removed three filter caps that were from the factory that were "Gorilla Tight" with a 1-1/8" six pt socket and many changes after that with ZERO damage to the cap.
โJun-12-2021 01:12 PM
Cummins12V98 wrote:
"Cross contaminating when they are side by side, doesn't require you to be gifted, just a big bowl of dumass in the morning"
That and high hitching a B&W puts you in a "Special" category.
โJun-12-2021 11:06 AM
โJun-12-2021 11:00 AM
cummins2014 wrote:Lynnmor wrote:cummins2014 wrote:Grit dog wrote:
This thread gets funnier by the day!
They haven't even got into the debate about socket size for the front fuel filter here yet , whether you should go 28MM or 1*1/8" :B
1-1/8" is way too loose, let the debate start here. ๐
Yup, but some insist its good enough .