So, I am replacing the flooring on my tt. And of course did not google this before I started. I unscrewed the toilet flange from the floor, but the flange did not come up, so I gave it a yank, and heard a noise like I broke the seal.So, I am assuming...
So, I have what I believe is at 6 gallon Atwood elec/propane hotwater tank from the 1995 era...I was gutting my trailer and had to remove it to put new flooring in. I tried to disconnect the black wire connector and it was brittle enough to break off...
So, I had to completely gut my trailer, previous owner did not know how to patch / fix anything... All corners were leaking, roof was leaking etc.So roof and corners all done, moved on to the front window in my '95 21 foot Dutchman. Resealed the fron...
I think I have confused myself, and before I close the ceiling up, I need to have clarification...I gutted my travel trailer, and I am down to bare metal, I took pics and documented as much as I could, but a yr later, (had to wait for the snow to mel...
So we bought a '94 Dutchman 20 foot TT.I knew it had a water leak in the front portion of the trailer, and once I pulled it down, it lead into more pulling and then thinking...So, next thing I know I have gutted the whole trailer, which is good becau...
yep would love to unscrew the flange from the fitting but someones infinite wisdom GLUED it!I am hoping I can find the ABS solvent cement in a squeeze tube as it would be much easier to apply...
ok so I would not say it is broken... I would say the glue that held the lip to the the tank gave out. I really did not have to yank hard. (I yanked it thinking the flange was stuck inside the tube to the tank)So, I can get my hand down the hole whic...
Well the sky's were grumbling last night, and I did not want to wreck anything more. So, I took a tube of clear ProflexRV and ran it along the outside seam.No leaks this morning!But, I know with movement and travel I will need to keep my eye on it, a...
Yes, actually I put a strip of Butyl around the window, then another strip around the opening. So, I made sure it was a snug fit.I also, bought Stainless Steel screws, 1 1/4" so it had more bite.I am replacing all my existing "water entry" points. IE...
