hauling can am spyder

[athena24]

we are having problems loading our spyder in our voltage toy hauler. little clearance entering the hauler, spyder stalls on incline. would have to fill in gap on ramp entering hauler. any suggestions?

[fivecodys]

Without pictures it makes it hard to fully understand the issues.
Could the Spyder have a sensor that kills the engine if the bike tilts beyond a set degree?? (Just a wild guess).

Are you telling us that the Spider "High Centers" when you try to load it? I had a friend that had a show bike that was real low. We had to get him half way up the ramp and then three of us lift the gate a few inches so that he wouldn't drag bottom as he entered the trailer.

I like the Spyders. Good for old guys with bad knees like me but my riding days are over.

Don't mind the Harley guys here.
Just remember Harley guys....
"You can buy better but you can't pay more!" 😛 (Just kidding of course)

Bill

[Slownsy]

That is because you are supposed to unload and drive them. Sorry I cu dent help myself. Not weary helpful to the poster thou.:)
Frank.

[avvidclif1]

KSadler1 wrote:

sato4000 wrote:
buy a motorcycle!!

Yes, get you a Harley and a case of paper towels to wipe all the oil up when you arrive at your destinations.....

Now you're showing your age. Since the EVO's (early 90's) the leakage problem has been solved. My 2 (96 Sporty & 97 Electraglide) never did leak.

Oh and Harleys never did leak, They marked their territory.

[hbillsmith]

Just winch it up.

[lpxguy]

hit the ramp doing 25:B

[Old-Biscuit]

How can a Spyder Can AM stall on an incline :H

What 'gap' between ramp and hauler?

Better description of issue or pictures would help with solution(s)/ideas.

[B_O__Plenty]

sato4000 wrote:
buy a motorcycle!!

X2!!

B.O.

[mikeh449]

because of low clearance or no traction

[riggsp]

I had a toy hauler way back when, and I put a piece of diamond plate aluminum 12" wide across the gap and attached it with a couple of hinges, so when the ramp was down the gap was covered...also had 2 barrel bolts attached to the ramp to keep the aluminum plate folded in place when the ramp was up.

[KSadler1]

sato4000 wrote:
buy a motorcycle!!

Yes, get you a Harley and a case of paper towels to wipe all the oil up when you arrive at your destinations.....

[KSadler1]

That doesn't make sense. Are you saying that the incline of the ramp is somehow cutting the fuel supply to the engine off? If so, maybe low on fuel is all I can think. Do you have pics?

[sato4000]

buy a motorcycle!!