โOct-26-2018 11:25 AM
โNov-01-2018 07:26 PM
JOHN&LAURA wrote:
Thank you for all the advice. For those of you who use the garage, my truck is 2 inches taller than the doors. Garage is out of the pic. Question for those that leave it hanging. What keeps it from rusting? (slide rails etc..) What keeps it from being stolen?
โNov-01-2018 10:25 AM
Only True Mosnowman wrote:
I have the B&W Slider and a Ford F350. I bought a HF engine hoist..I think the 1,000 pounder. It will not completely reach to my goose neck hole. ( not puck system) My bro in law purchased the larger hitch from HF and his is longer. I believe the 2,000 pounder. It extends out farther.
I too am trying to figure out how to get it out of the hole..then slide to within reach of hoist to get it out of truck. No beams to attach winch. I didnโt know if a floor jack rigged up in some way could get it out of the hole and onto a dolly to get it to hoist. I want to leave hitch in a storage unit not on fifth wheel.
Good luck! If you figure out something please post back here your solution.
โOct-31-2018 03:02 PM
โOct-30-2018 02:57 PM
โOct-29-2018 05:58 PM
โOct-29-2018 09:46 AM
JOHN&LAURA wrote:
As I have posted earlier, we have moved up to a Grand Design 5th wheel and a new Ram 2500 CTD. I talked the DW into letting me get the B&W Companion sliding hitch that fits in the factory puck system. I am trying to come up with a way to lift this in and out of the Ram's bed. Has anyone ever tried a engine lift to do this? Harbor Freight has them for Under $180.00, for a 2 ton. I don't have any trees to wench from. Just trying to see if anyone has tried it. Thanks
โOct-29-2018 05:21 AM
โOct-27-2018 06:52 AM
โOct-27-2018 06:42 AM
NMDriver2 wrote:
I just pull the rail pins and let the landing legs on the 5er lift it. I leave it hanging on the 5er pin when not in use. Easy to re-attach when needed and out of the way when not.
โOct-27-2018 06:19 AM
Dave H M wrote:
I just do not understand going thru all the gyrations that some do to remove the hitch.
Mine just hangs on the king pin like others have stated. no muss no fuss :h
โOct-27-2018 05:42 AM
โOct-27-2018 04:59 AM
โOct-26-2018 06:52 PM
โOct-26-2018 05:49 PM