What did you do to your Toy Hauler today???

[Rich_Panganiban]

This is always a fun thread to watch so I thought I would start one here.

[CJW8]

I topped off my batteries. The 3 Group 24's took a total of 1/2 gallon. It was 8 months since last checked. Then I ran a equalize charge.

[eDUBz]

joebedford wrote:
Our bathroom wall behind the sink is curved. Will the peel N stick take a curve?

Yup. Its flexible and adheres well.

[joebedford]

Our bathroom wall behind the sink is curved. Will the peel N stick take a curve?

[eDUBz]

nayther wrote:

eDUBz wrote:
Thanks, I got it at Lowes its smart tiles peel n stick. I also did the kitchen backsplash you can see it on the previous page. 🙂

I took a look at this stuff last night, seems pretty easy to do, what did you cut it with for a straight edge? Thinking about trying it for the little spot above my bathroom sink first to see if I like it, will only tank two or three squares.

A pair of scissors. Since they are stagger just follow the first rectangle piece up every other piece. So everyother rectangle you will be cutting in half.

[nayther]

eDUBz wrote:
Thanks, I got it at Lowes its smart tiles peel n stick. I also did the kitchen backsplash you can see it on the previous page. 🙂

I took a look at this stuff last night, seems pretty easy to do, what did you cut it with for a straight edge? Thinking about trying it for the little spot above my bathroom sink first to see if I like it, will only tank two or three squares.

[eDUBz]

Added fastway break away trailer cable - added a fuse block for the added accsesories what's cool about is it has small led lights next to the fuses and it lights up to let you know what fuse is blown. - mounted a Usb outlet with built in switch. I got this idea from RvCircus and he mentioned on the YouTube video that there's a light that stays on in the USB plugs. So instead of adding a switch I surfed Amazon for a couple of hours and found this USB outlet used for motorcycles. The usb comes with a round handle bar mount I just tossed it out. And because I have 3 strand of blue led lights I decided to run one underneath the counter the kids dig and it's pretty cool when we're hanging out late night with the rear ramp down. That's it for today:C

[eDUBz]

Thanks, I got it at Lowes its smart tiles peel n stick. I also did the kitchen backsplash you can see it on the previous page. 🙂

[nayther]

joebedford wrote:
The backsplash looks great. Where did you get that?

yes, please do tell, looks great.

[dedmiston]

don't let my wife see that backsplash!

[joebedford]

The backsplash looks great. Where did you get that?

[eDUBz]

Added the maxx air vent 2 to the center vent.


Also did the backsplash in the bathroom, wife is happy.

[Got_Dirt_]

N-Trouble wrote:
Just picked the trailer up from having the axles flipped and Dexter EZ-Flex and wetbolt/HD shackle kit installed. IT now tows level and has a much nicer ride.

Did the Dexter over/under and EZ-FLEX last year. I really like it as well.

[N-Trouble]

Just picked the trailer up from having the axles flipped and Dexter EZ-Flex and wetbolt/HD shackle kit installed. IT now tows level and has a much nicer ride.

[dedmiston]

nayther wrote:

Strabo wrote:
Climbed the ladder of death to replace the fridge vent cover and the fantastic fan, hope i never have to do that again @225lbs cause i think i exceded the weight limit on the ladder. Going up is ok, going down is no fun. I had to do it twice to adjust fantastic fan cover.

Maybe you need to go on a diet Jim!

I have just the ticket for you. I'm down 36 pounds since Halloween.

[nayther]

Strabo wrote:
Climbed the ladder of death to replace the fridge vent cover and the fantastic fan, hope i never have to do that again @225lbs cause i think i exceded the weight limit on the ladder. Going up is ok, going down is no fun. I had to do it twice to adjust fantastic fan cover.

Maybe you need to go on a diet Jim!