What did you do to your Class C MH today???

[Rich_Panganiban]

This is always a fun thread to watch in other forums, so I thought I'd start one here.

[jrlibbie09]

Just put back in storage for couple of weeks. Returned from out of town trip with it with kids on Spring Break. Everything worked great.

[hlenoble]

Finished replacing all of the curtains/mini blinds with new ones, except for the cab over area. Still need to fix one leak over the bedroom where the previous owner bolted through the roof to mount a TV. Also need to install a wall bracket for the 19" LCD TV/DVD player.

[Roadfrog]

Installed auxilliary backup lights - they're just halogen driving lights that I wired to the reverse switch and mounted near the hitch.

[Kamphiker]

2 week countdown until 1 week trip to Smoky Mountains for spring break. So I'm doing the gotta get done stuff.

*Washed exterior and waxed fiberglass roof
*Added a 12 volt power connection for my wifes CPAP
*Wife made slip covers for dinning booth cusions and lounge chair
*Cut a piece of gray Diamond plate matting to protect the front carpet
*drove to propane station and filled tank
*checked all the chassis things(tires, fluids, batteries etc.)

[AstroRig57]

Might not sound like much but a big improvement to me.

I have metal valve stems on the duals (not extensions) that protrude through the openings in the wheels and Versa-Liner wheel simulators. The ones from the outer dual have always gotten "hung up" when you try to remove the wheel liner. You had to "hold your tongue just right" and bend the opening slightly to get the wheel liner off.

Today, I used a dremel tool to gently grind the the wheel liner making the inside edge of the hole adjacent to the valve stem slightly "oblong". I then used a dremel polishing wheel to smooth the edge. I probably removed less than a 1/4" of material, at the deepest point, but the difference it made in easing the removal and installation of the liners is amazing.

[hlenoble]

Used Eternabond on all of the roof seams. Tomorrow it's re-sealing the marker lights, and then I should be set with the exterior. This is an old unit that I bought about 6 weeks ago. It's dry inside but I can see evidence of some slight past damage so I'm taking precautions. Next up is new mini blinds.

It's only 25 days until I take the first trip with it. I'm heading to Great Lakes, IL for my son's graduation from Navy boot camp.

[Roadfrog]

Put on a Canada and U.S. Stick on, "States and Provinces visited", map on the side of the MH by the door.

Tomorrow, I'll be installing the new 15" LCD TV in the rear bedroom.

Come oooooon warmer weather.......

[Kamphiker]

Rotated the spare tire to the right front as the right front is showing more cracks in the side walls near the rim than I like. All 7 tires are dated around the 23 week of of 2005(2305). Spare look like it was never on the ground.

I hope I never have to change out a tire on the road, Just getting the spare tire out from the storage rack under the rear and back in place is a real PITA. Doing a tire change on a busy interstate road is no fun, I thought it was bad on my old Travel Trailer but that was easy compared to this one.

Glad I have road service, just hope I never have to use it.

[bukhrn]

Took it on it's 60 mi exercise.

[bukhrn]

eatyeo wrote:
Had a quickie

Not sure that sounds right.;)

[luvpups67]

Its home out of storage, greaseing and oil change and spring clean, check roof

[eatyeo]

Had a quickie

[Danal_Estes]

Taking it in for an alignment.

[summerhouse]

Picked it up from RV Service Center and drove it 70 miles home.
Had Bilstein shocks installed as well as a couple warranty issues taken care of--Rear wheel flares had cracks in them (new ones painted and installed, thermostat replaced and a couple small issues cleared up.

[Kamphiker]

Installed replacement exterior mirrors. The mirror heads turned Yellow. Called Velvac and their customer service sent me FREE replacements (Mirror head including heated element glass and motor).

Takes all of about 5 minutes per side.\

And Thank you Velvac ! a great company.