โJan-14-2018 01:22 PM
โJan-15-2018 08:50 AM
โJan-15-2018 03:12 AM
Bill.Satellite wrote:
Check the power inserter. Verify the output voltage is close to 25V DC. Check all coax connections inside as well. When watching the controller display, does it ever say "identifying" indicating it found ANY satellite? If not, it could easily be a bad LNB or a bad coax as mentioned above.
โJan-15-2018 03:11 AM
โJan-15-2018 03:06 AM
โJan-15-2018 02:07 AM
โJan-14-2018 07:40 PM
โJan-14-2018 07:34 PM
โJan-14-2018 02:35 PM
Bill.Satellite wrote:
Do the Calibrate EL routine and start again. Let us know what happens.
โJan-14-2018 02:23 PM
โJan-14-2018 02:09 PM
โJan-14-2018 01:39 PM
2oldman wrote:
I assume you've tried their website FAQ?
My first guess would have been a cable but sounds like that's covered. By 'checked every coax' did you test continuity throughout the entire cable? They can develop internal breakage.
โJan-14-2018 01:33 PM