Ceiling fan

[LOFAT36]

Is my 4 blade overhead ceiling fan in my 5er 12 volt or 110 ?

[RollandB]

Now that while ceiling fanmwith the black tape cracks ne up. My old trailer was 110, haven't checked the new one yet

[Executive45]

I installed mine today! It's 120VAC.....Dennis

[LOFAT36]

Thanks guy's

[BTPO1]

donn0128 wrote:
If by turning off breakers it stopped, you answered your own question. Breakers are for 120VAC. Fuses are for 12VDC!

X2

[donn0128]

If by turning off breakers it stopped, you answered your own question. Breakers are for 120VAC. Fuses are for 12VDC!

[LOFAT36]

Well I can't try it because it broke. I couldn't shut it off last year so I started turning off breakers until it stopped. But of course it shut off some of my plug ins at the same time. So I am assuming 110. It doesn't work at all now with all breakers on. 2012 Crossroads Cruiser.

[BBFD]

I think either we need more info or you need to follow the advice above. My TH is 12v and my brother's FW is 110v so it could be anything unless you tell us more about your RV.

[Homer1]

I betting it is 110v. It should state right on it what voltage is.

[BTPO1]

robsouth wrote:
Unplug from shore power and see if fan works. If so, DC, if not, AC.

Unless there is an inverter installed.

[BTPO1]

I don't know, but I would start by looking at my power panel and see if it is marked and see if it has a breaker or a fuse. If what you have is new there should be some literature that came with it. It really would help others if they knew what type of RV you have. JMO

[robsouth]

Unplug from shore power and see if fan works. If so, DC, if not, AC.