โMar-23-2016 10:57 AM
โMar-25-2016 09:16 PM
Almot wrote:
Most suitcases are 100-120W for a good reason. 27 lbs is already heavy, and a suitcase of 2*70 or 2*100 will be both heavy and bulky.
For what you are planning - permanent controller in pass through - buying 2 separate 100W panels and other components as suggested by Westend makes more sense than 2 100W suitcases and separate controller. Much lower cost. Cheaper than Eco200 kit, too. I would keep 2*100W detach-able, joined with pins or something (think sailboat rudder pintles). Makes it easier to carry separately.
I don't see what is so special about Kickass kits, other than - hopefully - better mechanical quality of panels and hinges than Chinese parts from Solar Blvd, Eco etc. Run of the mill panel is strong enough as it is. Controller in Kickass is same basic/featureless unit as others mentioned here, except for being weather-proof. You don't need it to be weather-proof for mounting it in pass-through.
300W Kickass that you've been eying, weighs 50 lbs and has about 3x3 ft folded size - I wouldn't want to lift and carry something like this. There is no free lunch in solar, more watts = bigger and heavier panels. That's why most people mount panels permanently on the roof ๐
โMar-25-2016 09:03 PM
dewey02 wrote:
Unfortunately, most of the suitcases are around 100-120 watts. There are a few that have more watts, but the price really climbs. I've been thinking about 2 100watt Renogy suitcases (without a controller) and then buying the controller separately so I can mount it in the pass-through closer to the batteries. Still, that will end up getting up there in price and probably more expensive than the Ecoworthy 200Watt.
โMar-25-2016 07:54 PM
โMar-25-2016 07:17 PM
smkettner wrote:
I will just pay for roof install when I can no longer climb up.
โMar-25-2016 06:10 PM
โMar-25-2016 06:06 PM
โMar-25-2016 05:37 PM
tonymull wrote:
I just built a 200w suitcase with the eco-worthy flexible panels. Got the aluminum stock from HD. Made retangular frames with 1" square at top and bottom and 1" L for the sides. Cut to length and the two fit together nicely with self tapping screws. Then I screwed the panels on with same screws (the panels have an aluminum backing). Hook the two framed panels together with a piano hinge, attach a short leg so they can be tilted as needed (doesn't need be long since they lay pretty flat anyway) with a wing nut for adjustment. Easy, took me about 2 hours. 200w, 47 X 22 when closed, and weighs about 15 pounds. Cost me about $450 with controller (PMW) and wiring, and a 20' extension. Actually used some old suitcase handles. The panels come with some pretty sturdy foam padding, these I keep in place with some bungie cord to protect the panels. There is no glass to break and even a pretty deep scratch will not impede them working.
โMar-25-2016 05:32 PM
โMar-25-2016 04:55 PM
โMar-25-2016 04:37 PM
โMar-25-2016 12:39 PM
โMar-24-2016 09:01 PM
โMar-23-2016 02:49 PM
โMar-23-2016 01:33 PM