Feb-03-2019 09:50 AM
Feb-04-2019 02:03 AM
Feb-03-2019 04:50 PM
Bob Vaughn wrote:
a couple years ago I purchased the Mopeka tank check system. I had the one with the inside monitor. It has worked fine until I replaced the batteries. Now tank 1 shows full and tank 2 shows empty and both tanks have been recently filled. When the Gateway became available I ordered one. Now the phone app shows both tanks empty.....I have done a couple of things that the trouble shooting hints said to do to no avail.....My friend bought his the same time I did mine and got so frustrated with his that he threw his in the trash. I do not want to go to that extreme.
I have emailed the company a couple of times but their suggestions do not help either....
Feb-03-2019 03:42 PM
ford truck guy wrote:Ditto, I just never felt the readings were very reliable, even when they did work.
I removed my sensors, took the system off, and an done trying to figure mine out..
They worked the first year, sketchy the 2nd year, and mostly not at all the 3rd..
Feb-03-2019 02:09 PM
Feb-03-2019 11:19 AM
marcsbigfoot20b27 wrote:
Mine do that occasionally also. It’s all about their position on the tank bottom, also the rubber can get bunched up or dislodged at the sensor. One of my sensors wires broke off at the solder joint, I repaired it.
Just try to reposition it on the flat part of the tank bottom, make sure it’s clean and no rust or anything.
Feb-03-2019 11:09 AM