โSep-12-2018 10:30 AM
โSep-14-2018 12:17 PM
Quote:
Thanks... any tips on thin stainless not turning blue? Is blue from heat? If so maybe go slower?
Thanks
If you are getting discoloration of the metal during drilling you are running too hot and are risking ruining the drill bit.
โSep-14-2018 09:04 AM
Thanks... any tips on thin stainless not turning blue? Is blue from heat? If so maybe go slower?
Thanks
โSep-14-2018 06:52 AM
โSep-14-2018 06:45 AM
Housted wrote:
One other thing to consider after drilling. If you use a stainless bolt and nut you need to put some anti-sieze on the bolt because stainless will sieze and weld it self if both nut and bolt are clean. Don't ask me how I know!!!
โSep-13-2018 04:09 PM
โSep-13-2018 12:19 PM
โSep-13-2018 12:13 PM
โSep-12-2018 07:57 PM
โSep-12-2018 05:27 PM
โSep-12-2018 05:10 PM
โSep-12-2018 04:53 PM
โSep-12-2018 04:10 PM
โSep-12-2018 03:29 PM
โSep-12-2018 02:44 PM