โMar-09-2014 06:33 AM
โMar-09-2014 01:16 PM
โMar-09-2014 10:30 AM
TomG2 wrote:
Who carries the 5" X 5" posts? I have only seen the 4" X 4" versions. Are they large enough?
โMar-09-2014 10:11 AM
โMar-09-2014 10:01 AM
โMar-09-2014 09:54 AM
โMar-09-2014 09:48 AM
โMar-09-2014 09:31 AM
โMar-09-2014 09:26 AM
Lynnmor wrote:Yeah, but most of the tools come with several bits. It's a very handy tool to have around if you're drilling many holes.fj12ryder wrote:
Use a Deburring tool.
Good idea but you will need the blade for internal holes.
Example
โMar-09-2014 09:24 AM
RetiredBob wrote:
I'm going to mount a 5"x5" vinyl fencepost for sewer hose storage. I'd like to drill a series of holes along the bottom to allow any liquid to drain out. How can I drill the holes without leaving burrs on the inside that could snag the hose?
โMar-09-2014 09:22 AM
โMar-09-2014 09:07 AM
โMar-09-2014 08:47 AM
โMar-09-2014 08:14 AM
TARDIS TIME TRAVELER wrote:
DRILL THE HOLES CLOSE TO THE CORNER OF THE 5"X5" POST AND THE BURS WILL BE OUT OF THE WAY.STAGGER THEM FROM SIDE TO SIDE ALONG THE LENGTH OF THE POST......
โMar-09-2014 08:04 AM
fj12ryder wrote:
Use a Deburring tool.
โMar-09-2014 07:13 AM