cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

6 volt batteries

Camsmom
Explorer
Explorer
Ordered two 6 volt golf cart batteries and picked up the 2 battery box from Century Plastics. Will wire these in series and strap them down and screw the box to the bracket. Is there anything else we need to do for this mod? Is the battery bracket on the tongue strong enough for the added weight. Anyone have any issues?
Thanks!
10 REPLIES 10

_tiredTeacher
Explorer II
Explorer II
Camsmom wrote:
Will these 6 volts require distilled water top ups. Are we best to connect them to a charger in the winter. Will keep them inside during the winter while the trailer is in storage.
Thanks again.

Yes to distilled water. And yes to a trickle charger and indoor storage.
Wright and Penny
2010 Tundra 4X4
2014 Rockwood 2604WS
"Life is a cruel teacher. She gives the test first; the lesson then follows."

Camsmom
Explorer
Explorer
The battery place is making a cable for us and our trailer has a battery disconnect switch.
Thanks for the cleaning information. Will these 6 volts require distilled water top ups. Are we best to connect them to a charger in the winter. Will keep them inside during the winter while the trailer is in storage.
Thanks again.

ianmac23
Explorer
Explorer
Marine grade battery disconnect......If you don't already have one
2010 GMC Sierra, 1500, SLT, Crew Cab, Short Bed, 6.2L, Max Towing Package,2011 Keystone Passport Ultralight Limited Edition

Krusty
Nomad II
Nomad II
You will need a short cable to connect the batteries together, if you don't already have one
Krusty
92 F-250 4x4 460 5spd 4.10LS Prodigy
97 Rustler RT190
EU2000i
Garmin

_tiredTeacher
Explorer II
Explorer II
Camsmom wrote:
Not sure what the suggestion about the baking soda/water solution was though?

Wet cell batteries develop a coating of acid on their exteriors from off-gassing during the charge cycle. Corrosion builds up on the battery terminals, too. This is normal. Many of us clean our batteries and terminals periodically with a water/baking soda solution. This neutralizes the acid and cleans the terminals. Rinse with plain water.
If you drill drain holes in your battery box, you can do this procedure without removing the batteries from the box.
Wright and Penny
2010 Tundra 4X4
2014 Rockwood 2604WS
"Life is a cruel teacher. She gives the test first; the lesson then follows."

Camsmom
Explorer
Explorer
Good suggestions, one strap will be a lock. We have Mini Lite 2109s. Bracket looks plenty strong, just wondered if anyone had any issue.
Not sure what the suggestion about the baking soda/water solution was though?

SoundGuy
Explorer
Explorer
Camsmom wrote:
Is there anything else we need to do for this mod?


You might want to wrap a cable lock around the box for added security.
2012 Silverado 1500 Crew Cab
2014 Coachmen Freedom Express 192RBS
2003 Fleetwood Yuma * 2008 K-Z Spree 240BH-LX
2007 TrailCruiser C21RBH * 2000 Fleetwood Santa Fe
1998 Jayco 10UD * 1969 Coleman CT380

westend
Explorer
Explorer
What trailer do you have? Typical tongue battery locations will support the weight of two batteries.
'03 F-250 4x4 CC
'71 Starcraft Wanderstar -- The Cowboy/Hilton

_DJ_1
Explorer II
Explorer II
Drill drain holes in the bottom of the box to get rid of the baking soda/water mixture for cleaning.
'17 Class C 22' Conquest on Ford E 450 with V 10. 4000 Onan, Quad 6 volt AGMs, 515 watts solar.
'12 Northstar Liberty on a '16 Super Duty 6.2. Twin 6 volt AGMs with 300 watts solar.

lanerd
Explorer II
Explorer II
Nope... sounds like you got it covered.

Ron
Ron & Sandie
2013 Tiffin Phaeton 42LH Cummins ISL 400hp
Toad: 2011 GMC Terrain SLT2
Tow Bar: Sterling AT
Toad Brakes: Unified by U.S. Gear
TPMS: Pressure Pro
Member of: GS, FMCA, Allegro


RETIRED!! How sweet it is....