quote wrote:
Can you post the whole pic for us ?
Thanks,Mike
I did my best to pan out. My wide angle is a little limited but these will give you a good idea.
I swaped the 'too large' OEM table for a 24" round table from Lowe's.
I mounted it on the same OEM slider track, so it slides out of the way against the window cushion or slides out into the aisle.
I placed the two plates on it to show the avl. room we have using the smaller table.
I sanded it and stained with a few coats of poly-U . We loose the extra dinette bed option but , for the two of us, we gain a lot of elbow/hip room when we sit at the dinette during our winter snomobiling vacations.
This simple 15x30 piece of 1/4" plywood has made the tc a very user freindly cabin for us .
OEM dinette with new 24" table
I store the 15x30 plywood under the cushion
I simply slide the plywood out to use as a footrest
Any pillow will work, we use our bed pillow or a small throw pillow
It makes a very comfy lounge chair , narrow enough to get up and use the bathroom etc., w/o having to undo it .
For the second person ,we use the OEM slideout tray that is used as a platform for the dinette bed.
From both lounges, we can view the 22" LED TV which is hooked up to the DVD sound system, speakers are above the dinette for easy listening.
Hope these pics helped show what we did . We did it this way in order to not make a permanent alteration and keep things as original for resale. As you can see, there was no real expense involved in doing this mod. It really works well and makes life more comfortable in our small non slide unit.
Regards, Bob and Dot