โFeb-28-2017 06:28 AM
โMar-18-2017 05:48 PM
FishOnOne wrote:dfb wrote:FishOnOne wrote:transamz9 wrote:FishOnOne wrote:
I had to drive thru Houston today and couldn't help notice a lot of 05-07 Super Duty trucks still on the road.
I didn't notice a single Dodge/ram cummins with the H.O. or the Blue Tec badge on the tailgate indicating a early 6.7 cummins truck. As a matter of fact I can't remember the last time I've seen one of these trucks.
I would also recommend the OP to research the other brands since they also have some ticking time bombs as well.
Just so you'll know, the HO didn't come out until 2012. Also very few of the early "Bluetec" trucks actually had the badge. All of the DPF trucks were Bluetec. Learn your trucks before you bash them.
I used to see a lot of these trucks around that why I was referencing these two specific types. Today u would have a better chance of winning the lottery than seeing one of these on the wild. Why is that? I think we know the answer!
You guys in Texas are still stuck in "Urban Cowboy" John Travoltas Ford.. we travel the U.S. coast to coast and see one heck of a lot more Cummins... No better engine for towing than the Cummins...Period.... even Nissan is putting a Cummins in their new trucks...
We've tried them all and the Fords just hold up better for our farm/ranch use. We do have a DRW mega cab dodge with the last of the best cummins 5.9 engine.
โMar-18-2017 03:10 PM
โMar-18-2017 08:41 AM
dfb wrote:FishOnOne wrote:transamz9 wrote:FishOnOne wrote:
I had to drive thru Houston today and couldn't help notice a lot of 05-07 Super Duty trucks still on the road.
I didn't notice a single Dodge/ram cummins with the H.O. or the Blue Tec badge on the tailgate indicating a early 6.7 cummins truck. As a matter of fact I can't remember the last time I've seen one of these trucks.
I would also recommend the OP to research the other brands since they also have some ticking time bombs as well.
Just so you'll know, the HO didn't come out until 2012. Also very few of the early "Bluetec" trucks actually had the badge. All of the DPF trucks were Bluetec. Learn your trucks before you bash them.
I used to see a lot of these trucks around that why I was referencing these two specific types. Today u would have a better chance of winning the lottery than seeing one of these on the wild. Why is that? I think we know the answer!
You guys in Texas are still stuck in "Urban Cowboy" John Travoltas Ford.. we travel the U.S. coast to coast and see one heck of a lot more Cummins... No better engine for towing than the Cummins...Period.... even Nissan is putting a Cummins in their new trucks...
โMar-18-2017 08:32 AM
FishOnOne wrote:transamz9 wrote:FishOnOne wrote:
I had to drive thru Houston today and couldn't help notice a lot of 05-07 Super Duty trucks still on the road.
I didn't notice a single Dodge/ram cummins with the H.O. or the Blue Tec badge on the tailgate indicating a early 6.7 cummins truck. As a matter of fact I can't remember the last time I've seen one of these trucks.
I would also recommend the OP to research the other brands since they also have some ticking time bombs as well.
Just so you'll know, the HO didn't come out until 2012. Also very few of the early "Bluetec" trucks actually had the badge. All of the DPF trucks were Bluetec. Learn your trucks before you bash them.
I used to see a lot of these trucks around that why I was referencing these two specific types. Today u would have a better chance of winning the lottery than seeing one of these on the wild. Why is that? I think we know the answer!
โMar-06-2017 05:30 PM
northshore wrote:
Just bought a 2006 f 350 6.0, mine has 67k miles, its a clean well maintained truck, but I am going in with eyes open and prepared for the worse, and basically thats a oil cooler and egr cooler. I checked the prices from "bulletproof diesel" in AZ and have watched just about every utube video by powerstrokehelp and dieseltechron.
Mine is like brand new, and even with doing the bulletproof I think I'll do ok, so far I am very happy with the truck. I think for the price of a much newer one you can make lots of preventive repairs.
There is no doubt that the 6.0 has the bad rep, and probably well deserved, however I have learned that the 05 thru 07 are better than the earlier ones, there were hundreds of changes for the 05 thru 07 by Ford.
Again my suggestion and what I plan to do is learn everything I can about the problems and take care of them.
i don't believe you will be sorry, Im not.
Not that Bill Hewitt is the final word on power strokes, but he does have a shop that works on them on a daily basis, he does make sense on a lot of things he says about diesels, a couple of vids I would suggest looking at are;
"tale of two trucks" and "what year power stroke is best"
I wouldn't buy or not buy a vehicle based solely on what he says or does, but I do take some of the information he has into consideration.
Dieseltechron, has excellent instructional videos on the 6.0 and explains what going on with the 6.0 even so I can understand it. Ron not only talks about how to repair but he shows you step by step. Rons you tube videos are very very good.
Do your self a favor and watch a couple of them. even if you never plan to pick up a wrench watch the videos they are excellent.
โMar-06-2017 05:24 PM
โMar-06-2017 05:16 PM
northshore wrote:
Just bought a 2006 f 350 6.0, mine has 67k miles, its a clean well maintained truck, but I am going in with eyes open and prepared for the worse, and basically thats a oil cooler and egr cooler. I checked the prices from "bulletproof diesel" in AZ and have watched just about every utube video by powerstrokehelp and dieseltechron.
Mine is like brand new, and even with doing the bulletproof I think I'll do ok, so far I am very happy with the truck. I think for the price of a much newer one you can make lots of preventive repairs.
There is no doubt that the 6.0 has the bad rep, and probably well deserved, however I have learned that the 05 thru 07 are better than the earlier ones, there were hundreds of changes for the 05 thru 07 by Ford.
Again my suggestion and what I plan to do is learn everything I can about the problems and take care of them.
i don't believe you will be sorry, Im not.
Not that Bill Hewitt is the final word on power strokes, but he does have a shop that works on them on a daily basis, he does make sense on a lot of things he says about diesels, a couple of vids I would suggest looking at are;
"tale of two trucks" and "what year power stroke is best"
I wouldn't buy or not buy a vehicle based solely on what he says or does, but I do take some of the information he has into consideration.
Dieseltechron, has excellent instructional videos on the 6.0 and explains what going on with the 6.0 even so I can understand it. Ron not only talks about how to repair but he shows you step by step. Rons you tube videos are very very good.
Do your self a favor and watch a couple of them. even if you never plan to pick up a wrench watch the videos they are excellent.
โMar-06-2017 02:40 PM
โMar-05-2017 12:50 PM
โMar-05-2017 12:39 PM
burningman wrote:
The great thing about the 6.0 I had is it changed its own oil.
You just kept adding it and it leaked it out on its own.
โMar-03-2017 09:48 AM
โMar-03-2017 09:33 AM
Turtle n Peeps wrote:it ran awesome. It ran better than my 08 Duramax with the same work done.
Strange? :h How so?
โMar-03-2017 09:28 AM
kennethwooster wrote:
Amen I realize the reputation of the 6.0. I had a 2003 and 2005. Loved them both. My theory on the 6.0 is to check its repair history. Most are not bad if repaired correctly. Should be able to buy one cheap.
โMar-03-2017 09:10 AM