Replacing foam grips on handles

[sremsing]

I need to replace the foam grips on my travel trailer handles. There is a pin at the top of each handle. Do these pull out for handle removal ? Do they go back in easily once I have replaced the foam on the handles ?

[RollandB]

Ours is bare stainless and hasn't been an issue.

[mike77leprechau]

I just left it bare stainless....

[dalenoel]

Camping World has a foam wrap that will work without removing the handle.

Probably available elsewhere also.

[DB2BRMI]

sjturbo wrote:
I'm thinking about bicycle handle bar tape! Many different styles and colors. Holds up well to use.

______________

That's what we do; basic black road bar tape - works great,
DB2

[BurbMan]

I used a pair of foam bicycle handlebar grips.

[sjturbo]

I'm thinking about bicycle handle bar tape! Many different styles and colors. Holds up well to use.

[crcr]

The foam grips on our handle was beginning to disintegrate, and I couldn't find any replacements. So I wrapped the old foam grip carefully with black Silicone tape (only sticks to itself -- has no adhesive). It worked very well!

[sremsing]

Thanks ! I figured they could, just wanted to be sure.

[westend]

Answered by Etrailer Yes the pins and handle can be removed with most. Pull up.