Forum Discussion
Atlee
Aug 16, 2018Explorer II
That's kind of a relief. It's much easier to make sure the trailer is spot on level front to back, which, with most refrigerators means side to side which according to Norcold is the most level sensitive position.
I find it a tad harder to dial in trailer levelness side to side, since we're talking about using either boards or the plastic blocks. Whereas, just a touch of the power tongue jack button will lift or lower the trailer very accurately.
I find it a tad harder to dial in trailer levelness side to side, since we're talking about using either boards or the plastic blocks. Whereas, just a touch of the power tongue jack button will lift or lower the trailer very accurately.
ScottG wrote:
According to the Norcold manual, it is more sensitive side to side:
"CAUTION: The refrigerator is made to operate within 3°
off level side-to-side and 6° off level front-to-back (as
looking at the front of the refrigerator). Operating it at
more than these limits can cause damage to the cooling
system and create a risk of personal injury or property
damage. Make sure the vehicle is level before you
operate the refrigerator."
About Travel Trailer Group
44,025 PostsLatest Activity: Feb 26, 2025