โDec-01-2015 04:21 AM
โDec-03-2015 07:55 PM
โDec-03-2015 06:04 PM
Reddog1 wrote:
I am amazed at how many people appear not to know how a TC is constructed. If you support the outside edges of the TC where it contacts the bed of the truck, that is all that carries the weight. Fact is, if you support the front and rear of the TC, that is all you need. Did you ever notice the TC jacks do not support the floor?
Wayne
โDec-03-2015 05:15 PM
Reddog1 wrote:KD4UPL wrote:My TC has never slid around. If you have this problem, it could be your tiedowns are not properly installed.
Wood is slick. The camper sill slide around like crazy. ...
Wayne
โDec-03-2015 05:15 PM
โDec-03-2015 02:36 PM
2004.5 Ram SLT LB 3500 DRW Quad Cab 4x4
1988 Bigfoot (C11.5) TC (1900# w/standard equip. per decal), 130 watts solar, 100 AH AGM, Polar Cub A/C, EU2000i Honda
Toad: 91 Zuke
โDec-03-2015 12:17 PM
โDec-03-2015 11:30 AM
โDec-03-2015 07:14 AM
โDec-02-2015 07:03 PM
70GTO wrote:Grit dog wrote:
Do you have a 5ver?
If not, remove the rails......
Seems simpler than cobbling up stuff to put the camper on.
That is the plan for down the road, but I was mainly wondering if it was alright to do just incase I would happen to buy a TC & need to take possession of it before I could get the rails out "We are going to look at a couple of used units this weekend".
Thanks for the advice, Bruce
โDec-01-2015 09:51 PM
โDec-01-2015 08:32 PM
โDec-01-2015 07:47 PM
KD4UPL wrote:My TC has never slid around. If you have this problem, it could be your tiedowns are not properly installed.
Wood is slick. The camper sill slide around like crazy. ...
2004.5 Ram SLT LB 3500 DRW Quad Cab 4x4
1988 Bigfoot (C11.5) TC (1900# w/standard equip. per decal), 130 watts solar, 100 AH AGM, Polar Cub A/C, EU2000i Honda
Toad: 91 Zuke
โDec-01-2015 02:18 PM
โDec-01-2015 01:29 PM