Hey guysWill be getting a new Imagine 2800BH next year and looking into getting a Equal-i-zer HitchI did the hitch size calculator on their website and it is telling me to get the 1400 lb version.GTW - 7995 lbsTongue weight - Dry 604 lbs - Rough actu...
Hi guysI am thinking of installing an inverter inside the front cargo hold and running a wire to the outside to a 30 amp receptacle so that I can plug my trailer plug into it when I want to use the inverter for power.Has anyone done this? If so, can ...
JiminDenver wrote:Terminal block holders also come in doubles or you can use this fuse block bus bar.Blue Sea Systems MRBF Surface and Terminal Mount Fuse Blocks Yes, I know that. But my question is can I use this type of fuse (Single fuse style) ins...
RoyB wrote:I like anything made by BLUE SEA... I don't like to put more than two ring terminals on a stud bolt... If you are planning on having several rig terminal connections then a Blue sea Terminal Strip would be the thing to use as well so th...
time2roll wrote:200 class T is fine. I would use 150 amp. That is all I am saying.GP also say #2 wire and 2/0 is getting installed.https://www.bluesea.com/products/5112/Fuse_A3T___Class_T_110_AmpAmpacity of #2 with 105C insulation is 210 ampsAmpaci...
time2roll wrote:Class-T will pass 2x rating for 60 seconds. That 1500 would have to draw 300 amps for a full minute to open. Not going to happen during normal operation. Check Blue-Sea graph.Not sure what you are saying. The manufacturer recommend...
MEXICOWANDERER wrote:Too tight of protection may blow a fuse. How? Inverters are rated for overcurrent to start a load that draws a lot more than nameplate design. My recommendation if to check with the manufacturer or vendor.My Trace is rated to sta...
