I'm trying to find the plug for a brake controller for a 2015 Winnebago aspect 30J. This rig is on the ford E450 frame that came wired with a 7 pin plug at the receiver. I have looked left of the Steering wheel per Winnebago's manual and also removed...
I'm new to toy haulers and read alot about how the pin weight will change when the garage is loaded. I'm not finding that to be true with my set up. With app 1800 lbs in the garage I might see about 50 lb change. I have a 386x12 triple axle trailer t...
I have a 2013 forest river xlr 386x12 toyhauler and have a question about the wiring from the battery. I have 2 pos leads one going to the disconnect switch and one going to a post off the 12 volt buss. The one going to the buss also has a 12 gauge w...
I have a new Thunderbolt 386x12 that every time I put it in storage for even a week, it will draw the battery down to where it will not have enough power to raise the gear. I always turn off the disconnect. The dealer is telling me that even with the...
You might have had one of the flush lines come loose, the main line from the outside splits into at least 4 smaller lines that are attached to the black tank to create the flush action. I had one come off and flood my floor on a 2006 cardinal. Had t...
Have to ask, are you sure that the battery discount switch is turned on. If you had the shore power plugged in the converter should have given enough 12v power to run the slides if the discount is on.
Thanks everyone, I'm towing with a 2012 3500 drw dodge so the pin weight is not a issue for me. The reason for my post is I read so many about how heavy the pin weight is on a unload toy hauler. The dealers are telling people with 2500 trucks that th...
