Apr-26-2015 08:49 AM
Apr-26-2015 01:48 PM
Apr-26-2015 01:27 PM
Apr-26-2015 12:58 PM
Apr-26-2015 12:42 PM
johntank wrote:
I would take it to a good welding shop and let them straighten the rail out and then put a piece of angle iron the same length as the rail under the bed to reinforce it using the center bolts closer to the hitch legs.
one of these is a double post
Apr-26-2015 11:31 AM
Apr-26-2015 11:30 AM
johntank wrote:
I would take it to a good welding shop and let them straighten the rail out and then put a piece of angle iron the same length as the rail under the bed to reinforce it using the center bolts closer to the hitch legs/runners for slider.
Apr-26-2015 11:24 AM
Apr-26-2015 11:03 AM
Apr-26-2015 10:24 AM
Apr-26-2015 09:28 AM
txbassmn wrote:
I do have center bolts but they aren't attached to anything but the bed and was pulling the bed floor up also.
Apr-26-2015 09:23 AM
Apr-26-2015 09:03 AM
Apr-26-2015 09:01 AM
txbassmn wrote:
I have a problem with my 5th wheel hitch rail bowing in the middle when using my slider. Has anyone else had this problem and if so what can you do to prevent this from happening. Here are a couple of pics to show the problem.