Help identifying Attitude ramp door bolt

[N-Trouble]

Anyone know where I could source these from? Bolt heads are Torx T40

[fj12ryder]

"Never give a sword to a man who can't dance."

--Confucius

[NRALIFR]

fj12ryder wrote:

akcooper9 wrote:
Dont be sorry. Its PC stuff like this as to why America has lost its way.

Seriously?

Seriously.

“The beginning of wisdom is to call things by their proper name.”

—Confucius

:):)

[fj12ryder]

akcooper9 wrote:
Dont be sorry. Its PC stuff like this as to why America has lost its way.

Seriously?

[akcooper9]

D.E.Bishop wrote:
I noticed that the Administrator/Moderator edited my post and removed one letter and substituted "h" for "s", I have been around for a long time and I still use old names for a few things like "-ex" bolts and Cotter Keys. I'm sorry, that's what I was taught.

To clear up what I said and why, use this link

Dont be sorry. Its PC stuff like this as to why America has lost its way.

[D_E_Bishop]

I noticed that the Administrator/Moderator edited my post and removed one letter and substituted "h" for "s", I have been around for a long time and I still use old names for a few things like "-ex" bolts and Cotter Keys. I'm sorry, that's what I was taught.

To clear up what I said and why, use this link

[nayther]

I've heard that style nut called a "Truss" nut too.

[fj12ryder]

Yeah, that's the good thing about Fastenal or Graingers: you can take the old nut and bolt in and compare the parts.

[D_E_Bishop]

fj12ryder wrote:
You need a Torx barrel nut, and bolt. The washer may be a separate part, mine was. You can find them at someplace like Fastenal or Graingers.

This seems to me to be your best solution, I don't know off hand what the thread sizes are for Tork screws so while there are a lot of substitutes for your nut, it's hard to say which supplier to send you to. There are a wide variety of T nuts and hex bolts but you would need to search further to find one that is acceptable.

[nayther]

McMaster-Carr would be another source.

[fj12ryder]

You need a Torx barrel nut, and bolt. The washer may be a separate part, mine was. You can find them at someplace like Fastenal or Graingers.

[newman_fulltime]

Look up self clinching captive fasteners

[donn0128]

Try fastenall.