Feb-07-2018 03:57 AM
Feb-17-2018 01:09 PM
troubledwaters wrote:JIMNLIN wrote:Actually, 2500 lbs is way off base. The current aluminum body F150's are about 2200 lbs including the bed liner and tonneau cover. Skip the tonneua cover and bed liner and its around 2100 lbs.
....Many F150HD owners report a rear axle weight in the 2300-2500 lb range depending on selections...
Feb-17-2018 11:46 AM
goducks10 wrote:johndeerefarmer wrote:
Well I am towing a GD Reflection 220rk with my '17 ecoboost. At 65mph I get around 9 mpg. With my Reflection 29rs I get around 7.5 mpg but its a heavier and taller trailer.
My truck is tuned by 5 star and has a Wagner CAC. It runs good! I also get great fuel economy when running unloaded on the highway. I would not consider a 1/2 ton diesel as they can't compete with the HP of an ecoboost
Whats your weights?
Feb-17-2018 11:43 AM
johndeerefarmer wrote:
Well I am towing a GD Reflection 220rk with my '17 ecoboost. At 65mph I get around 9 mpg. With my Reflection 29rs I get around 7.5 mpg but its a heavier and taller trailer.
My truck is tuned by 5 star and has a Wagner CAC. It runs good! I also get great fuel economy when running unloaded on the highway. I would not consider a 1/2 ton diesel as they can't compete with the HP of an ecoboost
Feb-17-2018 11:37 AM
Feb-15-2018 10:00 AM
JIMNLIN wrote:irishtom29 wrote:
An F-150 can be had with over 3000 pounds payload. Really. That’s plenty for some 5th wheels.
That 3000 lbs is a gvwr based payload placed over front and rear axle. When 3000 lbs is placed in the F150 bed such as pin weight/truck camper will overload the trucks 4800 rawr.
The most any F150 can carry in the bed such as a 5th wheel pin weight/hitch and other junk is in the 2400 +/- lbs range all depending on how much the F150 rear axle weighs.
Many F150HD owners report a rear axle weight in the 2300-2500 lb range depending on selections.....now add 3000 lbs back there = 5300-5500 lbs for a big overload.
High HP/torque numbers make a better towing machine. However like all trucks that carry a 5th wheel or GN or carry a TC ita gotta' have enough rear axle/tire/wheel and rear suspension to carry a heavy load in the bed.
Feb-13-2018 07:42 AM
JIMNLIN wrote:Actually, 2500 lbs is way off base. The current aluminum body F150's are about 2200 lbs including the bed liner and tonneau cover. Skip the tonneua cover and bed liner and its around 2100 lbs.
....Many F150HD owners report a rear axle weight in the 2300-2500 lb range depending on selections...
Feb-11-2018 05:35 AM
irishtom29 wrote:
An F-150 can be had with over 3000 pounds payload. Really. That’s plenty for some 5th wheels.
Feb-10-2018 07:31 AM
Feb-09-2018 04:12 PM
Quantum82 wrote:Most mfg's beef up the suspension to handle the extra weight and power of the diesel engine. Diesel engines have a longer life span because they are built to handle the torque and high compression as well as running much cooler. Diesel fuel also has higher BTU than gas which provides better fuel economy. Diesel are built better for work and pulling because of their high torque. Also when trading in a Diesel vehicle, the odometer reading is less relevant because of the diesel drive train reliability.justme wrote:
I's stick with diesel. Even the 1/2 ton trucks are now offering diesel alternatives these days-- finally 🙂
Hard to make the numbers work on the 1/2 diesel.
More expensive fuel (around me anyway), more expensive maintenance, marginally better fuel economy, but not enough to offset the extra $$ for fuel and maintenance.
Plus the upfront $4000 extra....I realize you'll recoup that on resale to some degree.
Plus...the weight cuts into your payload...rending the 1/2 ton useless for towing anything over 5000lbs legally.
A friend of mine has the a 2015 Ecodiesel...it has 908lbs of payload.
He can barely put his family of 6 in his truck without going over payload.
Sounds like a great idea, but I think diesels in the 1 ton segment make the most sense.
Feb-08-2018 09:47 PM
Feb-08-2018 03:29 PM
Feb-08-2018 11:48 AM
Feb-08-2018 07:26 AM
hone eagle wrote:
Dont dismiss single vs twin too lightly, they dont spend that kind of money X a million units without a very good reason ,in this case pressure ramp up is earlier in the torque curve then a single - more torque more sooner.
Feb-08-2018 02:31 AM