โJul-31-2015 07:33 AM
โNov-22-2015 01:34 AM
โNov-14-2015 10:57 AM
MinnCamper wrote:
Manual sliders here. Used it once in 15 yrs on my short box. Good insurance. Good luck
โNov-14-2015 10:56 AM
MinnCamper wrote:
Manual sliders here. Used it once in 15 yrs on my short box. Good insurance. Good luck
โNov-13-2015 08:53 PM
โNov-13-2015 06:01 AM
rreynold51 wrote:
I know I read some one's comment that the sidewinder didn't work well with a B&W hitch but can't find it now. I talked with vendor and they told me they had a specific wedge for the B&W and it works great. I have a SB truck and looking at either the sidewinder or the airborne sidewinder to provide some better maneuverability. Does the airborne addition work well enough to justify the extra costs??? And anyone have any issues with the sidewinder and B&W hitch???
Thanks!
โNov-13-2015 05:57 AM
rreynold51 wrote:
I know I read some one's comment that the sidewinder didn't work well with a B&W hitch but can't find it now. I talked with vendor and they told me they had a specific wedge for the B&W and it works great.
Question:
Can a Revolution Pin Box work satisfactorily with the B&W Companion 5th Wheel hitch for a gooseneck hitch? A blog on the B&W website says no, but it doesnt seem to be and official B&W entry or statement. Just bought a new 5th wheel Skyline Walkabout 28RE w/ dry wt. of 6745. So far this combination has worked great with no indication of a problem.
asked by: Gene B
Expert Reply:
No, a Sidewinder or Revolution pin box cannot be used with a B&W Companion hitch that fits in the gooseneck ball hole.
The problem is that the pivot point on the trailer is locked out at the hitch and moved back 22 inches to the turret on the Revolution/Sidewinder. This creates extra stress and torque on the hitch. This extra force can end up twisting the hitch, and where it connects in the gooseneck ball hole, and can damage both.
If it was the Companion hitch that fits in the 4 pucks on the OEM Ford and Ram 5th wheel/gooseneck hitch prep packages then a Revolution or Sidewinder can be used.
You would have to have a regular 5th wheel trailer hitch installed to tow with a Revolution pin box. If you can tell me the year, make, and model of the truck and the length of the bed I can make some recommendations. However, the gooseneck hitch would have to come out to install a 5th wheel hitch.
expert reply by: Michael H
โNov-13-2015 05:41 AM
โOct-15-2015 01:29 PM
newman fulltimer wrote:
do yourself a favor get the sidewinder
โOct-09-2015 05:50 AM
โOct-04-2015 07:42 AM
busmanns wrote:
I use a pull-rite and love it never having to think about anything just back up or turn any turn.
โOct-03-2015 07:49 PM
โOct-02-2015 07:14 PM
โOct-02-2015 04:03 PM
โAug-06-2015 02:38 AM