wet bolt kits

[ford_coupe]

Am thinking of replacing shackle bolts w/new wet bolt kit from tweetys-they list a 2 1/4 & a 3 1/8 kit how do you order proper one 5er is a 2008 durango 325 w3 slides. thanks for any help,John
also how about replacement shocks-just take off one & have it measured at auto store?

[ford_coupe]

thank youn to all that replied was very helpfull, am going to go with dexter e-z flex kit. thanks again, John

[TXiceman]

If you want the best, step up to a Mor/Ryde IS independent Suspension system.

Ken

[JerJan10]

x4 Dexter E-Z Flex Much smoother ride and fairly easy to install.

[rhagfo]

ford coupe wrote:
Am thinking of replacing shackle bolts w/new wet bolt kit from tweetys-they list a 2 1/4 & a 3 1/8 kit how do you order proper one 5er is a 2008 durango 325 w3 slides. thanks for any help,John
also how about replacement shocks-just take off one & have it measured at auto store?

I believe the 2-1/4" and 3-1/8" refers to the length of the shackles.

[tahoemc]

aruba5er wrote:
How about changing the whole thing out and go with the Dexter E-Z Flex suspension system. Go to Dexter e-z flex on google and learn more about it. It comes complete for $170/ 190 $ better the ride and no increased labor.

X3. The ride seems much quieter after the mod - I'm happy!

[wilber1]

aruba5er wrote:
How about changing the whole thing out and go with the Dexter E-Z Flex suspension system. Go to Dexter e-z flex on google and learn more about it. It comes complete for $170/ 190 $ better the ride and no increased labor.

That's what I did on my previous rig. Not much more money than just changing the bolts and the same amount of work.

[parkdep]

This has worked very well Never fail shackle kit

[Puddles]

There's a sticky on the travel trailer thread with pics and info... very well done.. 🙂

[AH64ID]

aruba5er wrote:
How about changing the whole thing out and go with the Dexter E-Z Flex suspension system. Go to Dexter e-z flex on google and learn more about it. It comes complete for $170/ 190 $ better the ride and no increased labor.

I'll 2nd this, comes with everything you need and really improves the ride.

[MainerBob]

Just had these put on my rig. The old bolt holes were really opened up with wear. Still waiting to try them out.

[aruba5er]

How about changing the whole thing out and go with the Dexter E-Z Flex suspension system. Go to Dexter e-z flex on google and learn more about it. It comes complete for $170/ 190 $ better the ride and no increased labor.

[Roger10378]

Measure the existing bolts to know what you need. If you are also doing heavier plates allow for those too.