cancel
Showing results for 
Search instead for 
Did you mean: 

Enclosed ATV Trailer

RVpullinGuy
Explorer
Explorer
For those of you who pull enclosed trailers for your ATVs/UTVs...

What is the best enclosed trailer? I prefer/need a 24' box with something like a 5' V-nose for hauling a RZR 4 900 LE and four other ATVs. What enclosed trailers do you have great experiences with... and why? What do you like about them? What don't you like about them? Thanks!
RVpullinGuy
2006 Chevy 2500HD Duramax/Allison CC SB
2005 Sierra T28 Toy Hauler
RZR XP41K, YamRaptor700, KawiKFX700, (2)Hon400Ex, Hon250EX, SuzLT80
19 REPLIES 19

sc3283
Explorer
Explorer
Pace
Hallmark
ATC
Gold Rush

are all good brands that I know of or have owned

a 5' tongue will allow you to back almost 90 degrees with a Class A

I now pull a 28' Pace with 5 foot tongue and flat nose...great trailer
04 D-Max Crew Dually

96 Monaco Dynasty 36'

zman-az
Explorer
Explorer
RVpullinGuy wrote:
What is issue with a v-nose?


As stated earlier, you lose real estate upfront on the V. Also if your quads are wide it is unlikely you will get two inside a trailer side by side. They are great if you can get everything inside the trailer and able to use the V doors. All depends on what toys you have and how they fit inside.

zmotorsports
Explorer
Explorer
Hey, a fellow Utahn. Don't see that too often.

Anyways, the "best enclosed trailer" is way too wide of a topic. I have had several enclosed trailers of various sizes over the past 20 years of RVing with pretty good results. We have hauled everything from snowmobiles, ATV's, motorcycles and street rods and now Jeeps and sand rail/ATV's.

Waaaaay too many options, and mainly price ranges to narrow down the best trailer.

We had a Wells Cargo 24' for about fifteen years and it was a great trailer and we pulled it around most of the U.S. behind three different coaches. In 2008 we wanted to upgrade to a 26' and something with heavier axles because we wanted to haul not only our sand toys but also our Jeep and Harley, at different times of course.

We seriously considered a stacker but realistically the weight of most of those things empty got me thinking about how much stuff (ie weight) I would be putting in it and then I was afraid I wouldn't be happy with the way the coach towed the trailer.

I looked seriously at T&E race trailers as at the time in my opinion I thought they were about the best enclosed trailer on the market. However, the cost of a T&E trailer is more than double what I was looking to spend.

With much more research I ended up special ordering a Haulmark Edge Race trailer, 26' long and had extra height added to it along with 7k pound axles, "L" shaped work bench, floor mounted winch, two 500 watt halogen flood lights on the right side, 4' side door (vs. 40" std door), full width rear door (98" opening), ATP flooring, extended tongue and the race package which consisted of flourescent lighting and electrical outlets spaced around the interior.

I also didn't like the option of mounting the spare tire under the floor such as where it was stored in our Wells Cargo so I opted out of a spare tire. Upon taking delivery I fabricated a tongue mounted bracket and covered the spare tire with a white and polished stainless steel Continental Kit for a fraction of the cost that Haulmark wanted for something similar.

So far I can say I have been very happy with the Haulmark trailer as we are just starting our 5th year with it and have towed it approx. 20k+ miles now, it tows fantastic.

The only thing that I would NOT recommend being as you are in Utah with wide temperature swings from season to season, is the seamless interior. When we ordered ours I questioned Haulmark about the durability and flexibility of the interior seams with varying temperatures and they told me it shouldn't be an issue. They were wrong. Upon the first cold snap of the first year of ownership multiple seams had become disbonded. I contacted Haulmark and they wanted me to bring it to Arizona where the trailer was manufactured. It was not built in Springville at the time because that is when the Springville Haulmark plant had burnt down. I convinced them to let me bring it to Springville for the warranty work now that they were back up and running but it took a lot of convincing.

The service manager at the Springville plant was very disappointed that they allowed a trailer to be built with the seamless interior that they knew would be sent to northern Utah. This made me a little pissed off to say the least because I had purposely asked this exact question. They agreed to fix it which they did. I picked up the trailer and was very disappointed in the many, many glue covered fingerprints and glue streaks on the interior. It took me about three days to clean the interior after picking it up from having the warranty work completed.

The following year, several other seams as well as a couple of the same ones came apart. I did not want to take it back for more warranty work so I had a local sheetmetal shop cut me some 1" wide strips of #4 grain stainless steel and applied it to the seams. Now after the past four years it is holding up well.

Mike.

Here is a picture of the interior with the stainless steel strips. Again I highly advise against the seamless interior. The adhesive just won't take the huge temperature swings we have here.
2003 Monaco Dynasty/ 26' Haulmark Edge trailer
2011 Jeep Unlimited Rubicon

GT6_Racer
Explorer
Explorer
We've had two Haulmark enclosed trailers (16' & 20'), a custom built 24' stacker, and now a Solares 20' enclosed. I think most are built about the same. I prefer smooth sides, not screwed. Looks much sleeker.

Currently outfitting the new Solares with 110v lighting & power, electric tongue jack, workbench, tire rack, and a bunch of Pit Pal stuff. I had it built with tandem 5200# axles because almost all trailers around this size are made with 3500# axles. That's too light considering the empty trailer will weigh around 3300#. I vastly prefer excess capacity versus being close to or overweight.

I also had it built with hidden dovetail, two roof vents, three 12v lights and an RV style door. We'll add more tiedown points where needed, and an aluminum ramp door threshold plate should finish it off.
2003 Avatar by Jayco
Cummins ISC / Allison 3000 / Spartan chassis

PCarnathan
Explorer
Explorer
A few weeks ago I ordered an enclosed cargo trailer from Carson Trailer here in California. I measured the length of our two ATVs and two PWC and ordered the trailer one foot longer. Even with the onboard fuel station I'm well within the weight capacity of the trailer. Incidentally, the trailer doubles as a "band equipment hauler" when we're not hauling the toys around.

I asked Carson to NOT install D-rings as I'd like to place them myself for my specific hauling needs

Pat in Menifee, CA
(Saving our pennies for a Class A)
www.patcarnathan.com
2009 Mandalay 43A
2009 Honda CR-V Toad
2011 Toyota Tacoma
2013 Honda Goldwing
2003 Honda TRX400ex (2)
2005 Honda Aquatrax F12-X (2)
2016 Yamaha YXZ1000R

The_Texan
Explorer
Explorer
nevadanick wrote:
Vnose adds length that wont be usable to park quads or rzr in.
However it adds door or doors to the V part, which allows the ATV or Rzr to be driven off or on. A flat nose with a door on the side would NOT allow the ATV to be driven off, as it will nor make a 90° turn to get out the door. I'll take a V nose any day, for ease of loading or unloading.

Bob & Betsy - USN Aviation Ret'd '78 & LEO Ret'd '03 & "Oath Keeper Forever"


2005 HR Endeavor 40PRQ, '11 Silverado LT, Ex Cab 6.2L NHT 4x4, w/2017 Rzr 4-900 riding in 16+' enclosed trailer in back.
Where the wheels are stopped today

nevadanick
Explorer
Explorer
Vnose adds length that wont be usable to park quads or rzr in.

RVpullinGuy
Explorer
Explorer
zman-az wrote:
RinconVTR wrote:
We went away from enclosed trailers for ATV's due to the size required to pull just 3. The Razrs will be even worse unless you're only pulling one. You will end up with a very large trailer, that is very difficult to load even 3 machines and even one Razr. And the weight...width...height...heck...might at well pull a travel trailer. At the time we had only one guy in the group with an Burb that could haul our trailer, and it was not good. We soon dumped that and I bought a 3 place Triton that I have towed with a Honda minivan...now a Pilot...on nuerous occasions and we never looked back.


Similar experience here. If you can rent one I would do that first so you know how it will work. Other than the razor what kind of quads do you have. The full size ones are really wide these days. I would also stay away from the V nose. They work great for snowmobiles but most ATV's are wide.


What is issue with a v-nose?
RVpullinGuy
2006 Chevy 2500HD Duramax/Allison CC SB
2005 Sierra T28 Toy Hauler
RZR XP41K, YamRaptor700, KawiKFX700, (2)Hon400Ex, Hon250EX, SuzLT80

ferndaleflyer
Explorer III
Explorer III
I have had about every kind known to man. Currently have a Pace, fully lined, 12 and 120volt lights inside and 2 halogen on the outside. Cabinets above and below + a generator compartment. Unless you are awful good at backing up I to would suggest the extended tongue and 3 axels. You won't believe the difference in stability. It won't hurt to think aluminum and some of those are pretty inexpensive these days.

zman-az
Explorer
Explorer
RinconVTR wrote:
We went away from enclosed trailers for ATV's due to the size required to pull just 3. The Razrs will be even worse unless you're only pulling one. You will end up with a very large trailer, that is very difficult to load even 3 machines and even one Razr. And the weight...width...height...heck...might at well pull a travel trailer. At the time we had only one guy in the group with an Burb that could haul our trailer, and it was not good. We soon dumped that and I bought a 3 place Triton that I have towed with a Honda minivan...now a Pilot...on nuerous occasions and we never looked back.


Similar experience here. If you can rent one I would do that first so you know how it will work. Other than the razor what kind of quads do you have. The full size ones are really wide these days. I would also stay away from the V nose. They work great for snowmobiles but most ATV's are wide.

motorhomi
Explorer
Explorer
We have had Haul Mark trailers for many years and have hauled race cars all over the country. Per my husband the best thing he has done is order an extended tongue on the trailer. It has made such a difference when trying to maneuver it and the motorhome.

katoomer
Explorer
Explorer
We have a Pace American GT enclosed trailer. Nice trailer, looks great but the quality of all trailers these days is pretty low as they are cranked out quickly to keep the prices down.
Or you could step up to an ATC or Gold Rush trailer if you want top quality. But then expect to pay big bucks.
2009 Newmar Ventana 3942
2010 Pace Shadow 18ft
2010 KTM 450 XCW six days
2010 Can Am Outlander 650 XT
2014 Can Am Outlander 500
2007 Yamaha YZ250F
1989 Douglas Skater 21' Twin 2.5s

C-Leigh_Racing
Explorer
Explorer
That E trac in the floor would be nice, at least then you could strap something down anywhere in the trailer.

As for the open bed trailer, which I do have as well & do use from time to time, park at a motel over night & see what you have left the next morning on that open bed.
Neil

jtrent6415
Explorer
Explorer
We use a 24' Haulmark trailer for our racecar. I see lots of haulmarks out there. Also I have heard H and H are good. C-Leigh is right, check the tires and their load range. I have also heard some trailers have undersized axles so you might check that. If we upgrade I will skip out on the wood floor and try to get aluminum. We don't have enough tie downs either, I am looking into installing some E-Tracks.
2011 Keystone Passport 2910BH
2005 Ford F-250 King Ranch (yes, the dreaded 6.0)
2004 Suburban 1500