As has already been mentioned several times, it is very simple to put pictures into your post on these forums.
To post photos do the following:
1. Upload your photo, one at a time, to
this site.2. Copy the resulting URL.
3. Paste the URL directly into your post with NO modifications. Do not add or subtract anything from the URL.
Your picture will then appear in your post and be properly sized for use on these forums. Do the same for each additional photo.
You just Upload, copy, and paste.
If you would like to practice doing that, just go to
this thread that I started in the DIY forum to try out the app.
This app was developed by one of our own moderators to simplify the posting of pictures. All that needs to be done is upload your picture to
our site, then paste the resulting URL into your posts.
Could not be much more simple to do than that!
๐ You don't even have to worry about the size of the photo as the software will re-size it to our forum recommendations.
Barney
2004 Sunnybrook Titan 30FKS TT
Hensley "Arrow" 1400# hitch (Sold)
Not towing now.
Former tow vehicles were 2016 Ram 2500 CTD, 2002 Ford F250, 7.3 PSD, 1997 Ram 2500 5.9 gas engine