โJun-29-2015 10:46 AM
โJul-20-2015 12:22 PM
Though a blocked percolator tube is but one cause of rendering a cooling unit faulty, by far the largest cause of unit failure today is due to leaks in the tubing, especially in those areas imbedded in the polyurethane foam block which surrounds the evaporator sections. Itโs been estimated that as many as 85% of cooling unit failures are due to leaks in these areas. Hereโs why.
Cooled tubing within the refrigerator attracts moisture in the form of condensation. This moisture envelopes the tubing and is typically retained there because the insulating foam prohibits it from being evaporated. A rust pocket develops and eventually a leak or crack appears. The hydrogen inside the unit is pressurized to over 300 PSI, so any small rusted area is likely to rupture at some point, especially under that kind of pressure. The tiniest of cracks simply cannot hold back the internal pressure behind those small hydrogen molecules. When cracks do occur in visible sections, though infrequently, a yellowish residue will be present and the wondrous odor of ammonia will be quite evident. If ammonia is detected when the refrigerator door is opened, it's time for a new cooling unit. Any crack or leak in the tubing renders the unit inoperable and replacement is, once again, a mandate.
โJul-13-2015 10:54 AM
โJun-29-2015 06:46 PM
โJun-29-2015 05:23 PM
โJun-29-2015 05:01 PM
โJun-29-2015 04:27 PM
โJun-29-2015 11:58 AM
โJun-29-2015 11:36 AM
โJun-29-2015 11:07 AM
โJun-29-2015 11:00 AM
โJun-29-2015 10:55 AM
โJun-29-2015 10:55 AM
โJun-29-2015 10:53 AM