โFeb-13-2014 05:18 PM
โFeb-14-2014 08:34 AM
โFeb-14-2014 05:52 AM
โFeb-14-2014 05:10 AM
โFeb-13-2014 06:22 PM
fcooper wrote:That sounds good because all I really wont to check is the gear box and the bell crank arms.I had all the parts checked once already.I am gonna get a second opinion because they told me the driver side arm had slop but after a greasing the slop went away.It is hard for me to believe that just simple grease job will tighten them up.
I think most of the front end components could be checked if you just remove the springs. You'll probably have to back off the nuts on the eye bolts to the springs to easily remove the springs.
Fred
โFeb-13-2014 05:35 PM