โNov-12-2020 07:42 AM
โNov-13-2020 03:51 PM
23hotrodr wrote:
I'm trying to get a hose to connect from a 20 lb bottle to my extend-a-stay connection via the disposeable canister connection instead of having to use wrenches on the inverted flare connection.
โNov-13-2020 03:39 PM
23hotrodr wrote:DrewE wrote:
I think a better solution would be to replace the
connector on the motorhome (and of course also on the hose that connects to the 20lb cylinder) with a propane quick connect fitting.
You are probably correct.
โNov-13-2020 03:29 PM
23hotrodr wrote:enblethen wrote:
Have you verified that the connection will allow for propane to flow into this connection being it is an outlet?
No- Without the proper hose setup, I don't have a way to test it. Since it appears to be the same as the fitting on a disposeable bottle and those allow for reverse flow to refill, it should.
โNov-13-2020 08:35 AM
DrewE wrote:
I think a better solution would be to replace the
connector on the motorhome (and of course also on the hose that connects to the 20lb cylinder) with a propane quick connect fitting.
โNov-13-2020 06:49 AM
โNov-13-2020 06:39 AM
enblethen wrote:
Have you verified that the connection will allow for propane to flow into this connection being it is an outlet?
โNov-13-2020 05:35 AM
Bud
USAF Retired
Pace Arrow
โNov-13-2020 03:56 AM
โNov-13-2020 03:07 AM
enblethen wrote:
OP: Yu asked for a male cannister fitting. Tom_M posted a female.
What are you trying to do, feed an appliance or refill the one pound disposable bottles?
โNov-12-2020 11:37 AM
โNov-12-2020 11:15 AM
Bud
USAF Retired
Pace Arrow
โNov-12-2020 10:28 AM
Tom_M wrote:
I think the OP is looking for the opposite of the previous links. Something like this from Amazon:
Propane Refill Adapter Hose
โNov-12-2020 10:16 AM
โNov-12-2020 09:59 AM