โJul-29-2009 05:39 PM
โFeb-07-2012 08:30 PM
โFeb-07-2012 06:30 PM
popeye59 wrote:
I thought the accumulator tanks had a rubber bladder to help maintain pressure
โFeb-06-2012 12:03 AM
โFeb-05-2012 05:47 PM
RustyFairmount wrote:
2L Water Accumulator Tank
Made from 4" PVC. Capped each end. Drilled and tapped schrader valve and 1/2" water line. Installed with cut-off valve on hot-water bypass (no red-pop will enter it). Total cost ~ $20 for the tank. Quiets pump operation. Runs longer, but less often.
โJan-31-2012 08:55 PM
โJan-31-2012 07:38 PM
โJan-30-2012 05:53 PM
RandK-M wrote:1150ap wrote:
Color is off but here are a few drawer
I like the drawers a lot. Right now I have two trays on the shelf under the sink. Were those drawers made from scratch or purchased?
Ray
โJan-30-2012 05:17 PM
โJan-30-2012 05:13 PM
โJan-30-2012 08:48 AM
1150ap wrote:
Color is off but here are a few drawer
โJan-29-2012 04:28 AM
โJan-28-2012 04:34 PM
โJan-25-2012 02:49 PM
my toys wrote:
Thanks for looking at my mods. I had alot of fun doing them. The medicine cabinet I got at lowes. I just screwed it in and used double sided tape. It isn't going anywhere.
โJan-24-2012 03:06 AM
bikendan wrote:
you are violating forum rules by your post and your profile and i've notified the moderators.
you should be banned shortly!
โJan-23-2012 05:58 PM