cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Anyone put a front hitch on their Silverado??

pmfinnegan2
Explorer
Explorer
Thinking of putting a front hitch on my 2009 Silverado as a place to carry the bikes when we travel. I want to stay away from modifying or trimming any part of the front air dam (or other pieces) when I install it.

Has anyone put one of these front hitches on their Silverado? If so, can you give me pictures? Did you have to trim anything to make it fit? If so how much?
pmfinnegan2
2016 Chevrolet Silverado Double Cab
5.3L Vortec V8, 4X4
2018 Jayco JayFlight 29BHDB
Equal-i-zer Hitch, Prodigy Brake Controller
16 REPLIES 16

Double_Haul
Explorer
Explorer
I added the draw tite to my 2004. no cutting, bolted right on. When carrying the bikes I had to tie them down to keep them from porpoising and also removed the seats for better vis.

2016 Chevy 2500HD LTZ Crew Cab, Duramax
2005 Terry 270FQS
2006 North River 20' Seahawk

bobsue2
Explorer
Explorer
A friend has one on his Ram. Had to trim the black plastic under the bumper to make it accessible.



Same here.....just make sure your transmission/power steering cooling lines don't rub against the new hitch.....GL
2013 Key Largo
12 MegaCab 3500 DRW 4x4 18k Superslide 19.5 Michelin LDX-2

tuna_fisher
Explorer
Explorer
2001 GMC with a Draw Tite I got from E-trailer, bolts right up, no cutting. I carry my dual sport motorcycle up front, have for years with 0 problems.I can't drive at night but thats it, I'm always sleeping then anyways. The only way to go as far as I'm concerened.
2001 GMC DM, 1995 Lance Lite, @005 Eclipse Toyhauler, Toy's!;)

dave17352
Explorer
Explorer
nevadanick wrote:
On my 2011 i had to notch the air dam



Same year here I got mine from curt and carry a honda eu3000 on a heavy cargo rack, no problems.
NOW 2017 Leprechaun 260ds
2005 Forrest River Cardinal 29rkle FW
1998 Lance 980 11'3" TC
2017 CHEVY 3500 SRW 6.0
B@W turnover ball @ companion Hitch
Honda eu3000 generator mounted on cargo rack
Crestliner 1850 Fish Ski boat mostly fishing now!

nevadanick
Explorer
Explorer
On my 2011 i had to notch the air dam

Mike_Taverniti
Explorer
Explorer
Have one on a 2004 GMC. Bought from Curt Hitches. Perfect fit with no mods other than you have to remove the tow hooks. Using it for 11 years now with no issues.

Norskeman
Explorer
Explorer
I have seen quite a few going down the road this summer.

My solution was adding a RV hitch to the trailer. Just did not want anything obstructing the air flow to the coolers mounted on the front (power steering, tranny, engine and inner cooler).

The hitch is much stronger than what I need for two bikes. The hitch sits lower than I like too - has rubbed a few times this summer on the rear of the hitch plate. I may make some modifications to it to bring it closer to the bumper.



2017 Keystone Avalanche 320RS
TV - 2011 Chevy Silverado 3500HD LTZ CCLB Duramax SRW 4X4

Latner
Nomad
Nomad
I've had 2 of them, 1 on a '94 silverado and 1 on the '12 I now have. Like 1oldtruck said, you have to notch the black plastic trim under the bumper enough for the tube to stick out, maybe 2.5". It makes moving trailers in tight spaces alot easier. I also use it for a receiver mounted snow plow. Go to e-trailer.com and you'll find install videos for this.

1oldtruck
Explorer
Explorer
A friend has one on his Ram. Had to trim the black plastic under the bumper to make it accessible. Nice addition to the truck though.

lizzie
Explorer
Explorer
We had a front hitch on our 2003 Silverado Truck. We used it to carry two bicycles when traveling and for a winch (as needed). I didn't like the bike rake on the front as I found it to be distracting. My husband didn't have a problem with it. As far as I know it was legal and it didn't cause any damage to the truck. lizzie

Peg_Leg
Explorer
Explorer
On my old 97 Chev, I mounted a homemade one where the tow hooks bolt on. I've used it a bicycle rack and did a lot of work with a 8,000 lb winch. BIL tried using a boom and the winch as a mini crane. He told me the boom bent. When I looked at it the bottom of the truck frame had went from a square shape to a U shape. The weight of the winch and a couple of hundred pounds on the end of a 6 foot pry bar was putting a good pull on the mounting bolts.

If you have tow hooks consider removing them and mounting a square tube receiver on both sides. Then you can slide any kind of rack you want into them and hit the road.
2012 Chevy 3500HD Dually 4X4
Crew Cab long bed 6.0 gasser 4.10
2019 Open Range OF337RLS
Yamaha EF3000iSE
retired gadgetman

gmcsmoke
Explorer
Explorer
With their incredibly weak IFS I'd be nervous just with the bumper hanging up there.

Just ask cummings1998z82, he'll tell you they all fail.

RoyB
Explorer II
Explorer II
brirene - after reading your Bodiak report it mentioned some other good uses for the front mounted hitch. Says they are great for spotting your RV trailer. I guess you would be always be better at pushing your trailer back into the parking spot instead of backing it into place.

That would be perfect for my off-road POPUP trailer. I can just see the camp ground folks watching me unhooking my trailer out in the middle of the camp road and driving off to find to find a turnaround spot... haha... "What the heck is wrong with this guy" hehe...
My Posts are IMHO based on my experiences - Words in CAPS does not mean I am shouting
Roy - Carolyn
RETIRED DOAF/DON/DOD/CONTR RADIO TECH (42yrs)
K9PHT (Since 1957) 146.52M
2010 F150, 5.4,3:73 Gears,SCab
2008 Starcraft 14RT EU2000i GEN
2005 Flagstaff 8528RESS

brirene
Explorer
Explorer
Would a Bodiak work for you? I was looking at one that connects to my tow hooks, but didn't go through with it...yet.
Jayco Designer 30 RKS Medallion pkg, Trail Air pin
'05 F350 6.0 PSD CC 4x4 DRW LB B&W Companion, Edge Insight

โ€œCertainly, travel is more than the seeing of sights; it is a change that goes on, deep and permanent, in the ideas of living." Miriam Beard