โFeb-28-2010 07:12 PM
โDec-05-2012 03:04 AM
Ricos Ride wrote:
Picked up my new Bullet Premier 29RTPR Monday at the dealer in Michigan and just arrived home with it today (1,900 mi round trip) Had the dealer install an Andersen WD hitch. It handled really nice. Average speed between 60-65, head winds, crosswinds and tractor trailers had no effect. Had great weather for this time of year and did a Wal-Mart camping in Erie PA. Now it is resigned to my driveway until next spring but at least I finally have it!
โDec-04-2012 06:55 PM
โNov-26-2012 06:43 AM
SueMcD wrote:
nothing major, but a few nice upgrades:
- New exterior graphics
- "Slam shut" front cargo doors
- New color: Dune (dk, brown cushions, but curtains/bedspread & wallpaper same as godiva)
- Extra cushioning on dinette backs?
- New faucet (includes a pull-out spray?)
- Cupboard & drawer pulls (knobs, not handles) purely a taste issue, but I do like the knobs better
- Different fridge (handle location is different)
- Cabinet stain looks a little darker
Sue
โNov-25-2012 12:03 PM
โOct-16-2012 01:11 PM
carjocky wrote:Pump is in the compartment in front of the laundry chute. We didn't like the loudness of the pump, so I glued 1/2" styrofoam insulation on all sides of the box,put an old mousepad under the pump and wrapped all hoses with old socks that came in contact with anything. We've had our 28rlpr for 3 years now and just love it !!!!LivingthedreamOH wrote:carjocky wrote:
Anyone had their water pump want to keep going and not shutting off? I just had this problem this weekend. I check for leaks and I did not see any. Water pressure was good. It just didnt want to shut off all the time after you shut the water off. It also seemed to get worse as the water level in the tank got lower.
Our friends had this happen. Loose connection in the hose restricted water flow. Tightened ...pump stopped.
I will have to find the pump and take a look at it tonight. Thanks,
โOct-16-2012 12:12 PM
LivingthedreamOH wrote:carjocky wrote:
Anyone had their water pump want to keep going and not shutting off? I just had this problem this weekend. I check for leaks and I did not see any. Water pressure was good. It just didnt want to shut off all the time after you shut the water off. It also seemed to get worse as the water level in the tank got lower.
Our friends had this happen. Loose connection in the hose restricted water flow. Tightened ...pump stopped.
โOct-15-2012 05:38 PM
carjocky wrote:
Anyone had their water pump want to keep going and not shutting off? I just had this problem this weekend. I check for leaks and I did not see any. Water pressure was good. It just didnt want to shut off all the time after you shut the water off. It also seemed to get worse as the water level in the tank got lower.
โOct-15-2012 05:02 PM
alanhalbert wrote:
I have a 28rl just got back from the first camping trip in new camper and we love it. The shower leaked very bad where the sides meet the shower pan. Other than that everything worked great.
โOct-15-2012 04:44 PM
โOct-15-2012 01:59 PM
โOct-15-2012 01:57 PM
alanhalbert wrote:
I just purchased a 2011 premier and it has a bent axle which axle is everyone putting in? I have read it somewhere in this post but now cannot find it thanks in advance for a newbie
โOct-10-2012 04:59 PM
โOct-07-2012 09:28 PM
โOct-06-2012 03:40 AM
โOct-05-2012 07:57 PM
gregrc75 wrote:PSUCamper wrote:
I have a 31BHPR and it came with the folding style table. Never been a big fan of it as I find it hard to fold up and difficult to level. I'm looking at ordering the pedestal style table legs. But I have a couple concerns:
1. They come in different lengths, 27.5,29,31 inches. Anyone have any idea what length I would need. My trailer is currently at a dealer getting some work done so I can't measure anything right now. Would like to have the legs by the time I get my trailer back.
2. Screw length. Obviously, I will have to be very careful fastening the bases to the underside of the table. Also the table is on a slide so it's a little concerning attaching it to the floor.
Has anyone done this themselves? Should I just play it safe and have a dealer do the install?
Thanks
My pedastals are 27.5 and the screws are 3/4". It looks easy enough to do if you are handy at all.
I am glad mine came with the pedastals but I wish it had the booth and not the U-dinette!