โJul-13-2019 06:34 PM
โJul-22-2019 05:20 PM
โJul-22-2019 01:44 PM
Grit dog wrote:PNW_Steve wrote:
I guess opinion do vary.
I have a Dodge 3500 with 5.9, 6speed and 3.73 gears.
IMHO: it's overgeared. I don't spend much time running 6th gear and reverse is too tall. I find myself slipping the clutch more than I like when backing up with a trailer on.
I have thought about putting a set of 4.11's in it.
My bus has 5.29's behind an Allison 6 speed auto. That would suit me perfectly except it had 6th gear locked out at the factory. I am working on getting 6th unlocked. Then it will be sweet.
Just my $0.02 ๐
Vehicles vary too, and you're comparing apples to oranges. You also drive too slow if you don't see 6th gear much in your 3rd Gen!
Agree reverse is too tall in the 5600 and G56 though.
โJul-16-2019 05:19 AM
โJul-15-2019 05:02 PM
โJul-15-2019 03:21 PM
โJul-15-2019 09:31 AM
โJul-15-2019 08:02 AM
PNW_Steve wrote:
I guess opinion do vary.
I have a Dodge 3500 with 5.9, 6speed and 3.73 gears.
IMHO: it's overgeared. I don't spend much time running 6th gear and reverse is too tall. I find myself slipping the clutch more than I like when backing up with a trailer on.
I have thought about putting a set of 4.11's in it.
My bus has 5.29's behind an Allison 6 speed auto. That would suit me perfectly except it had 6th gear locked out at the factory. I am working on getting 6th unlocked. Then it will be sweet.
Just my $0.02 ๐
โJul-14-2019 06:29 PM
โJul-14-2019 12:37 PM
Headed West wrote:
I am looking at a 2019 F-250 with the 6.7 Turbo Diesel. My question is it has 3.55 rear end. I am towing a Keystone 30RLS I don't believe I am over 10K. fully loaded. Any issues towing with this gear ratio?
โJul-14-2019 12:28 PM
โJul-14-2019 08:05 AM
โJul-14-2019 07:33 AM
โJul-13-2019 07:18 PM
FishOnOne wrote:
I have 3.55 and it's not problem at all. It'll pull like a freight train.
โJul-13-2019 07:09 PM