โMar-18-2020 05:59 AM
โMar-19-2020 05:14 AM
โMar-18-2020 12:12 PM
bid_time wrote:
Number one, move that 50 lbs of gear you want to put in the truck to the trailer. At that point it only adds 7 lbs to the tongue weight (14%), giving you 43 more lbs of payload to work with.
โMar-18-2020 11:14 AM
If it helps, I also weighed the truck yesterday at a CAT scale. I filled it full of gas and weighed it with me outside of the truck. Here is the actual truck weight:
Steer Axle: 3060 lbs
Drive Axle: 2240 lbs
My biggest concern at this point is "how do I estimate which RVs have a trailer hitch weight I can support?" I know this will be an estimate, but I want to be careful I don't overload my truck from the start. Is 14% of the trailers GVWR a safe assumption for purchasing? Or any other advice to estimate this?
โMar-18-2020 10:58 AM
sliptap wrote:
@Boomerweps - you are correct on the values! My truck has the 53A standard tow package. Max Tow Package is only available for 3.5 ecoboost. Thanks again for the previous advice also.
โMar-18-2020 10:36 AM
โMar-18-2020 09:48 AM
โMar-18-2020 09:38 AM
Merrykalia wrote:
That is the real problem with half ton pickups from ALL the manufacturers. Unless you special order something, most of the trucks sitting on the lots are VERY limited with payload. They look pretty and all the additional "pretties" also eat up your payload numbers.
I would guess and say that 50% of the people out there that purchase their first truck and camper are over their specs. Maybe not grossly overweight, but......
A little knowledge up-front will make you feel better and will make for a better experience.
โMar-18-2020 08:57 AM
โMar-18-2020 08:19 AM
โMar-18-2020 08:19 AM
โMar-18-2020 08:07 AM
โMar-18-2020 07:56 AM
โMar-18-2020 07:53 AM
โMar-18-2020 07:30 AM
โMar-18-2020 07:28 AM