โMar-30-2015 07:13 AM
โApr-07-2015 09:06 AM
Old Duck wrote:
tendear, I'm sorry, but the pics I took didn't turn out very well. The good news is I'm about to order some more slides to do the 3 dresser slides in the bedroom. With a trip,we are about to take it will probably get to these sometime in May. Hopefully that will work for you, if not I'll help anyway I can.
โApr-06-2015 08:50 PM
โApr-06-2015 05:34 AM
โApr-05-2015 07:13 PM
Old Duck wrote:
This thread got me motivated to get the 5 slides installed today that have been sitting in my garage for about 3 months. Because of a gas line going to the stove and the water heater control board, I had to build a couple of spacers to build out from the back wall . Spent about 4 hours total, about half of that was removing the old slides and building the spacers. Now all 8 drawers in our kitchen have full extension ball bearing 100# slides. It's amazing how curling up like a ball, reaching to the back of a cabinet through a 5x11 opening while laying on a kitchen floor will wear you out. Time well spent though.
โApr-03-2015 09:40 PM
โApr-03-2015 05:18 PM
โApr-03-2015 03:04 PM
โMar-30-2015 09:38 PM
โMar-30-2015 06:53 PM
pconroy328 wrote:
(Almost) all side mounted slides require 1/2" space on both sides (+/- 1/32nd).
โMar-30-2015 01:26 PM
Veebyes wrote:
Anyone found & done such an upgrade?
โMar-30-2015 09:11 AM
We must be willing to get rid of the life we've planned,
so as to have the life that is waiting for us.
โMar-30-2015 09:07 AM
โMar-30-2015 09:03 AM
2005 GulfStream Ultra Supreme, 1 Old grouch, 1 wonderful wife, and two silly poodles.
โMar-30-2015 07:16 AM